Oki B4600 Installation Instructions: Second Paper Tray (500 Sheets) - Page 1
Oki B4600 Manual
View all Oki B4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation Instructions, Second Paper Tray (500 Sheet) Directives d' installation, Deuxième bac à papier (500 feuilles) Instrucciones de Instalación, Segunda Bandeja de Papel (500 hojas) Instruções de instalação, Segunda bandeja para papel (500 folhas) English 1 Français 3 Español 5 Português 7 English Install the Tray 1. Unpack the tray and remove the shipping materials. 2. Turn off the printer and unplug the power cord. 3. Remove the interface cable. 4. Note the location of the pins (1), connector (2) and tray opening (3). 7. Attach the connection cable. 8. Reattach the interface cable. 9. Plug in the power cord and turn on the printer. Verify installation Models with Operator Panel 11. Check the MEDIA MENU settings shown on the MenuMap and make any needed changes for • TRAY2 PAPERSIZE • TRAY2 MEDIATYPE • TRAY2 MEDIAWEIGHT to match the print media you will normally use in Tray 2. (If you need help with this, see "Operator Panels" in your on-line User's Guide. Load Paper 1. Pull out the tray. 5. Pull down the printer's manual feed tray. a. Press the Menu button one or more times until INFO. MENU appears on the display. b. Press SELECT twice. The MenuMap prints. Models with Control Button 6. Lower the printer onto the auxiliary tray, aligning the holes/plug on the bottom of the printer on the pins/connector on the tray. You should feel the printer seating and locking in place. a. Press the Control Button to take the printer off-line. b. Press and hold down the control button for at least 2 seconds, but less than 5 seconds. The MenuMap prints. 10. Look for TRAY2 on the first page of the MenuMap under the MEDIA MENU listing. If it isn't there, check to be sure that the connection between the printer and Tray 2 is secure, then reprint and recheck the MenuMap. 1