Oki B4600 Installation Instructions: Second Paper Tray (500 Sheets) - Page 2

2. Position the paper guides in the tray. 3. Fan the paper. 4. Lift the paper bar (1) and load paper (up to 500 sheets 20-lb. US Bond). Keep the stack below the full line (2). Note: To install paper in Tray 1: a. Open the Tray 2 front panel. b. Slide Tray 1 out. AUTOFEED To set the printer to switch to Tray 2 when Tray 1 is empty: Printers with Operator Panel Set AUTOTRAY on in the Print Menu. Printer with online Status Monitor Go to the Paper tab in the Status Monitor. Select Auto Tray Switch. Activate the Tray in the Printer Driver Windows® PCL Driver 1. Click Start → Settings → Printers [Printers and Faxes for XP]. The Printers (Printers and Faxes) dialog box opens. 2. Right click the Oki printer icon, then click Properties. 3. Click the Device Option(s) tab. 4. For Available Tray, select Lower Cassette. 5. Click OK. Close the Printers (Printers and Faxes) dialog box. 4. Next: • Windows XP, 2000, NT 4.0 and Me: under Installable Options, click Available Tray and select 2. • Windows 98: under Change setting for Available Tray, select 2 (1 Optional Tray). 5. Click OK. Close the Printers (Printers and Faxes) dialog box. Macintosh® PostScript Emulation Driver Printers with PostScript option installed OS 8.x and 9.x 1. Activate Chooser from the Apple menu. 2. Select LaserWriter 8. 3. Click Printer → Setup. 4. Click Configure. 5. Change the Available Tray setting to 2 (1 Optional Tray). 6. Click OK twice. 7. Close Chooser. OS X.1 No activation is required. OS X.2 1. Activate Print Center from Local Hard Drive → Applications → Utilities → Print Center. 2. Highlight the printer name. Select from the menu Printers → Show Info. 3. Click the Available Tray drop-down menu and select 2 (1 Optional Tray). 4. Click Apply Changes. Exit to the desktop. 5. Lower the paper bar and push the tray back into the printer. PostScript Emulation Driver Printers with Postscript option installed 1. Click Start → Settings → Printers [Printers and Faxes for XP]. The Printers (Printers and Faxes) dialog box opens. 2. Right click the Postscript emulation printer icon, then click Properties. 3. Next: • Windows XP, 2000 and NT 4.0: click the Device Settings tab. • Windows Me and 98: click the Device Options tab. 2