Oki B6250n Reference Guide - Page 152

Leaning, Rinter

Page 152 highlights

CLEANING THE PRINTER This section describes how to clean the printer in order to maintain it in good condition and print clean printouts all the time. CAUTION Be sure to switch off and unplug the machine before accessing the interior of the machine for cleaning, maintenance, or fault clearance. Access to a live machine's interior can cause electric shock. CLEANING THE EXTERIOR Clean the exterior of the printer about once a month. Wipe the parts with a wet but well-wrung soft cloth. Then wipe with another dry soft cloth. For stubborn stains, moisten a soft cloth with a small amount of neutral detergent, and gently wipe the stain off. Important: • Do not spray the detergent directly on the printer. The liquid detergent may enter the printer through a gap and cause problems. Never use cleaning agents other than water or neutral detergent. CLEANING THE INTERIOR After clearing paper jams or replacing the drum/toner cartridge, inspect the inside of the printer before closing cover A. CAUTION Never touch a labelled area found on or near the heat roller. You can get burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it by yourself to avoid B6250/B6500 User's Guide> 152

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173

B6250/B6500 User’s Guide> 152
C
LEANING
THE
P
RINTER
This section describes how to clean the printer in order to maintain
it in good condition and print clean printouts all the time.
CAUTION
Be sure to switch off and unplug the machine before
accessing the interior of the machine for cleaning,
maintenance, or fault clearance. Access to a live machine’s
interior can cause electric shock.
C
LEANING
THE
E
XTERIOR
Clean the exterior of the printer about once a month. Wipe the parts
with a wet but well-wrung soft cloth. Then wipe with another dry soft
cloth. For stubborn stains, moisten a soft cloth with a small amount
of neutral detergent, and gently wipe the stain off.
Important:
Do not spray the detergent directly on the printer. The liquid
detergent may enter the printer through a gap and cause
problems. Never use cleaning agents other than water or
neutral detergent.
C
LEANING
THE
I
NTERIOR
After clearing paper jams or replacing the drum/toner cartridge,
inspect the inside of the printer before closing cover A.
CAUTION
Never touch a labelled area found on or near the heat roller.
You can get burned. If a sheet of paper is wrapped around
the heat roller, do not try to remove it by yourself to avoid