Oki B6500 B6500 Network Guide - Page 28
Ethernet 10Base-T
View all Oki B6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
INTERFACE The printer LPD is available on the following interfaces: • Ethernet 100BaseTX • Ethernet 10Base-T The applicable frame types conform to Ethernet II. SET UP PROCEDURE The setting procedure is as follows: 1. Setting up the printer Set the IP address on the printer control panel. Use the printer control panel or printer web page to set the LPD port to [Enable] (default: [Enable]). NOTE > Before activating the LPD port, set the IP address of the printer. For details on how to set the IP address and the port, refer Printer Configuration. > The printer web page allows more detailed settings. 2. Settings of the workstation Set the printer in the workstation. Refer to: "Setting Up the Workstation" on page 29 B6500 Network Guide> 28
B6500 Network Guide> 28
I
NTERFACE
The printer LPD is available on the following interfaces:
•
Ethernet 100BaseTX
•
Ethernet 10Base-T
The applicable frame types conform to Ethernet II.
S
ET
U
P
P
ROCEDURE
The setting procedure is as follows:
1.
Setting up the printer
Set the IP address on the printer control panel.
Use the printer control panel or printer web page to set the
LPD port to [Enable] (default: [Enable]).
NOTE
>
Before activating the LPD port, set the IP address of the
printer. For details on how to set the IP address and the
port, refer Printer Configuration.
>
The printer web page allows more detailed settings.
2.
Settings of the workstation
Set the printer in the workstation.
Refer to:
“Setting Up the Workstation” on page 29