Oki C9300n C9300 & C9500 Handy Reference Guide - Page 52
Remove The Paper, Nnn:finisher Stacker Full, Nnn:trayx Unsuitable Size, Fuser Missing
View all Oki C9300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Error Messages (cont.) REMOVE THE PAPER nnn:FINISHER STACKER FULL One of the stacker trays in the finisher is full: • nnn = 481 Top (face up) Stacker Tray • nnn = 482 Main (face down) Stacker Tray What to Do Remove the stack of printed sheets from the appropriate finisher tray. REMOVE THE PAPER nnn:TRAYX UNSUITABLE SIZE The paper in Tray X is not a size that can be fed through the tray. What to Do Replace the paper in the tray with an appropriate size. FUSER MISSING Appears on the second line of the display to indicate that the fuser is not properly installed. What to Do 1. Open the top cover 2. Press down on the fuser to be sure it is firmly in place. Note: If the message still appears, push the blue release latches at either end of the fuser (between the fuser and the sides of the printer) toward the open cover and lift the fuser out. Then lower it back into the printer pushing down firmly. You should feel the latches at either end engage. 3. Close the cover. 49