Oki ES9465 ES9465/ES9475 Copying Guide

Oki ES9465 Manual

Get Oki ES9465 PDF manuals and user guides View all Oki ES9465 manuals
Add to My Manuals
Save this manual to your list of manuals

Oki ES9465 manual content summary:

  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 1
    MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS Copying Guide ES9455 MFP ES9465 MFP/ES9475 MFP
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 2
    ©2013 Oki Data Corporation All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of Oki Data.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 3
    loss of data. Indicates information to which you should pay attention when operating the equipment. Other than the above, this manual also this manual, each model name is replaced with a series name as shown below: ES9455 MFP ES9465/9475 MFP Model name Series name ES9455 MFP ES9475 MFP Series
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 4
    in the A/B format is used are given in this manual. If you use paper in the LT format, the display or the order of buttons may differ from that of your equipment. ‰ Trademarks The company and product names given in this manual or displayed in this software may be the trademarks of
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 5
    the set functions ...57 Restrictions on function combinations 57 Paper Selection...58 Automatic Paper Selection (APS 58 Selecting desired paper manually 59 Copying mixed-size originals in one operation 60 Switching Color Modes...62 Setting Original Modes ...63 Density Adjustment...64 Enlargement
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 6
    Sort/Group mode ...78 Rotate sort mode ...80 Staple sort mode ...81 Magazine sort / Center fold / Saddle stitch 85 Hole punch mode ...88 Manual staple mode ...90 Duplex Copying ...91 Making a 1-sided copy...92 Making a 2-sided copy...93 Making a 2-sided copy from a book-type original 94 Performing
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 7
    data ...177 Deleting Groups or Templates 179 Deleting private groups...179 Deleting templates...180 Chapter 7 CONFIRMING JOB STATUS Confirming Copy Job Status 184 Confirming jobs in progress or ones in waiting 184 Confirming copy job history 189 Confirming trays ...190 Confirming amount of toner
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 8
    6 CONTENTS
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 9
    BEFORE USING EQUIPMENT 1. This chapter describes what you need to know before using this equipment, such as the composition of the BASIC menu for the copying functions and how to place copy paper. BASIC Menu for the Copier Function 8 Placing Paper...11 Acceptable copy paper ...11 Placing paper in
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 10
    of "BASIC", "EDIT" and "IMAGE". 5. Alert message indication area This shows alert messages such as the replacement timing of the toner cartridges or the waste toner box. When this equipment is managed with the user management function and department management function In the above case, the job
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 11
    1.BEFORE USING EQUIPMENT 1 BEFORE USING EQUIPMENT 12. [JOB STATUS] button ( P.184) This is for confirming the processing status of copy, fax, scan or print jobs, and also for viewing their performing history. 13. [PROOF COPY] button ( P.38) This is for making a proof copy to check an image before
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 12
    P.11 "Acceptable copy paper" - Is the gap between the paper and the side or end guides too big? P.13 "Placing paper in trays" If the indication still remains, contact your service representative. ES9455 MFP: The amount of paper remaining in the standard tray (first tray) is displayed as follows
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 13
    copying. The values are valid only when Oki-recommended paper is used. For the recommended paper, refer to the Quick Start Guide. y Do not place paper with mixed guides. y Printing quality or performance may deteriorate depending on the condition or using environment of the paper type. ES9455 MFP
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 14
    1 BEFORE USING EQUIPMENT ES9475 MFP Series Feeder Paper type Trays Paper Feed Pedestal Additional Drawer select "THICK 2" for the paper type. *7 Duplex copying is available only when waterproof paper supporting it is used. *8 The second tray, the Paper Feed Pedestal, or the Additional Drawer
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 15
    the power of this equipment ON. 2 Pull out a tray carefully until it comes to a stop. When placing paper in the Paper Feed Unit of ES9455 MFP or the tray, Paper Feed Pedestal, or Additional Drawer Module of ES9475 MFP Series, proceed to step 4. Placing Paper 13
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 16
    to 600 sheets (64g/m2) (17 lb. Bond) for ES9475 MFP Series, the Paper Feed Unit, Paper Feed Pedestal, and the Additional Drawer Module. Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. P.11 "Acceptable copy paper" y Fan and jog the stack
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 17
    mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper misfeeding occurs, make a gap. Between the paper and end guide ("B" in the figure): Make sure there is no gap. (0.5 mm (0.02") or less) 8 Change the paper size indicator if required. A B 9 Push the tray straight
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 18
    )] or [AUTO (inch)], it is registered automatically and its buttons do not appear on this screen. If you want to register the corresponding paper size manually, see the following page to change the settings. P.17 "Registering paper size" 16 Placing Paper
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 19
    1.BEFORE USING EQUIPMENT 1 BEFORE USING EQUIPMENT „ Registering paper size When you place paper for the first time or you replace the paper with that of a different size, you need to register the size to this equipment. When paper size is set to be detected automatically: When [AUTO (mm)] or [AUTO
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 20
    this tray. For how to set Automatic Change of Paper Source, refer to the MFP Management Guide. y The set paper type appears on the equipment status indication area with an 209 g/m2 (91 lb. Index - 110 lb. Index) for ES9475 MFP Series only THICK 3: 210 - 256 g/m2 (111 lb. Index - 140 lb. Index) for
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 21
    "FAX" is used. For printing lists, refer to the MFP Management Guide. *3 When "ROTATE SORT" is turned ON for RX printing in the FAX menu, "FAX" cannot be set for attribute. For how to set RX printing, refer to GD-1320/GD-1260 Operator's Manual
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 22
    1 BEFORE USING EQUIPMENT 3 Press [PAPER TYPE]. 4 Select the paper type. 1) Select the tray in which you placed paper. 2) Select the paper type. 3) Press [OK]. 20 Placing Paper
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 23
    1.BEFORE USING EQUIPMENT 5 Press [OK]. 1 BEFORE USING EQUIPMENT If thick paper cannot be fed, printing takes a long time after feeding or the quality is poor, turn over the paper and place it again as shown in the figure or place fewer sheets. There is no affect on the printing quality though
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 24
    ) (17 lb. Bond) can be placed in the 2 trays. However the stack height of the paper must not exceed the line indicated inside the side guides. P.11 "Acceptable copy paper" y The copy side may be noted on its wrapping paper. y Be careful not to cut your fingers when fanning the paper
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 25
    1.BEFORE USING EQUIPMENT 1 BEFORE USING EQUIPMENT ‰ Adding paper in the Large Capacity Feeder during copying When the paper on the left tray of the Large Capacity Feeder has run out during copying, "Paper for left tray can be added." appears. You can pull out the Large Capacity Feeder and add
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 26
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 27
    HOW TO MAKE COPIES 2. This chapter explains the basic copying procedures. Before Making Copies...26 Storage of color copies...26 Forgery prevention function...26 Placing Originals ...27 Acceptable originals ...27 Placing originals on the original glass ...27 Book-type originals...28 Using the RADF (
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 28
    Keep copies away from them. y When copies are left under an extremely high temperature environment such as in the vicinity of a heater, toner may melt. Store them at room temperature and avoid extreme temperature changes. „ Forgery prevention function This equipment has a forgery prevention function
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 29
    North America: LD, LG, LT, LT-R, ST-R, COMP *1 Automatic size detection for originals on the original glass is available only for ES9455 MFP / ES9475 MFP Series. y Automatic size detection does not work properly when A/B format originals are used in equipment for North America. It does not work
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 30
    2 HOW TO MAKE COPIES When you copy highly transparent originals When you copy highly transparent originals such as OHP films or tracing paper, place a blank sheet, which is the same size as the original or larger, over the original. 3 Lower the Original Cover or the RADF carefully. When it is being
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 31
    carefully. 2 HOW TO MAKE COPIES y Do not lower the Original Cover or the RADF forcibly when the original is very thick. There will be no problem in copying even if it is not fully lowered. y Do not look directly at the original glass because intensive light may escape during copying. y If
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 32
    should be fully smoothed out before being used.) 1 2 3 4 5 6 7 8 9 10 11 When black streaks appear If the scanning area or the guide area is dirty, image trouble such as black streaks may occur on printouts. Weekly cleaning of these areas is recommended. For cleaning, refer to the Quick
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 33
    copied first. 2 Place the originals with their face up and align the side guides to the original length. y Regardless of their sizes, originals are acceptable up the originals and then press [CONTINUE] on the touch panel while the data of this set are being scanned. When this scanning is finished,
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 34
    . It is useful when you want to copy only 1 original sheet. P.137 "ADF -> SADF" 1 Align the side guides to the original length. 2 Insert the original with its face up and straight along the side guides. The original is automatically pulled in and then the menu of step 3 will be displayed on the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 35
    Making Copies „ Basic copying procedure Make copies following the procedure below. 2 HOW TO MAKE COPIES 2 RADF Original glass OR 1 4 35 1 Make sure that paper is placed in the tray(s). For the types and sizes of acceptable paper and how to place it, see the following pages: P.11 "Acceptable
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 36
    "SADF (single feed mode)" is set to the document feeder or in modes where the original is placed on the original glass and the scanned data are temporarily stored in the memory, such as sort copying or 1-sided to 2-sided copying. When this menu appears, follow the procedure below. There are
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 37
    copying. Press [NEXT COPY] on the touch panel or the [START] button on the control panel to restart. When you press [JOB CANCEL], the scanned data will be deleted and any waiting jobs will be performed. Even if you do not press [JOB CANCEL], the scanned
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 38
    the touch panel or the [RESET] button on the control panel while the scanning is being paused, the scanning will end. (In this case, the data which were scanned before the job was paused will be copied.) To restart the scanning, press the [START] button. 36 Making Copies
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 39
    2.HOW TO MAKE COPIES 2 HOW TO MAKE COPIES „ Interrupting copying and making other copies You can interrupt the copy job in progress to make other copies (interrupt copying). When restarting the interrupted job, you do not have to reselect copy modes that have been set because they are memorized in
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 40
    2 HOW TO MAKE COPIES „ Proof copy When you make a large amount of copies, you can check if they will be made exactly as you desire by copying only one page before copying them all (proof copy). Then you can change the modes or settings (e.g. the number of copy sets, receiving tray, page number, time
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 41
    2.HOW TO MAKE COPIES 2 HOW TO MAKE COPIES 6 Change the number of copy sets and copy modes as required after checking the proof copy. Modes or settings such as the number of copy sets, the receiving tray, page number, time stamp, sort/stapling and hole punching can be changed. If you want to
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 42
    2 HOW TO MAKE COPIES „ Selecting Stacker You can select the stacker if the finisher or the Inner Tray is installed. y The available stacker may be restricted depending on copy modes and paper sizes. y Stacker selection is set at automatic selection by default. Changing the stacker The stacker
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 43
    2 HOW TO MAKE COPIES Copying from MPT When you make copies on OHP film, sticker labels, envelopes, Thick 4 paper (only for ES9475 MFP Series), or nonstandard size paper, place the copy paper on the MPT. Copying from MPT is also recommended for copying on standard size paper which
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 44
    y The height of the paper must not exceed the indicator on the side guides. y When you use more than one sheet of paper, fan the sheets well of the MPT. This could cause a paper misfeed. 3 Align the side guides to the paper length. Move the paper holding lever toward the equipment. When paper
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 45
    2.HOW TO MAKE COPIES 2 HOW TO MAKE COPIES 4 Select the same size button under "COPY" as that of the paper you placed on the MPT. The paper size is now set. If the paper size is not selected in this step, copying may be slowed down. 5 Press [PAPER TYPE] on the touch panel if the paper type of the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 46
    2 HOW TO MAKE COPIES 6 Select the paper type. 1) Select the paper type. 2) Press [PRINTED] under "BACK PRINTED" to print on the back side of the paper. 3) Press [OK]. y ES9455 MFP: y ES9475 MFP Series: 44 Copying from MPT
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 47
    a wrong paper type, this could cause a paper misfeed or significant image trouble. y When you select a paper type, you can confirm it with the These paper types are available only for ES9475 MFP Series. Icon About "BACK PRINTED" When making 2-sided copies manually, select a paper type for one side
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 48
    2 HOW TO MAKE COPIES 7 After setting the paper size and type, press [OK]. The menu returns to the BASIC menu. 8 Select other copy modes as required, and then press the [START] button on the control panel. When you copy on sheets of OHP film, remove the copied OHP film one sheet at a time as they
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 49
    2.HOW TO MAKE COPIES 4 Press [OTHER] under "COPY". 2 HOW TO MAKE COPIES The paper size is now set to the one registered as "OTHER" size. If the paper size is not selected in this step, copying may be slowed down. 5 Press [PAPER TYPE] if the paper you placed on the MPT is other than plain paper.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 50
    ] under "BACK PRINTED" to print on the back side of the paper. 3) Press [OK]. y ES9455 MFP: y ES9475 MFP Series: y If you select a wrong paper type, this could cause a paper misfeed or significant image trouble. y When you select a paper type, you can confirm it with the icons displayed on the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 51
    DL (110 mm x 220 mm), COM10 (4 1/8" x 9 1/2"), Monarch (3 7/8" x 7 1/2"), CHO-3 (120 mm x 235 mm), YOU-4 (105 mm x 235 mm) y Refer to the Quick Start Guide for the recommended envelopes. Notes for using envelopes Do not use the following envelopes as they may cause paper misfeeding or damage to the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 52
    the outside. Place the envelope with its face down on the MPT. Place the envelope with its flap side at the front. 4 Align the side guides to the length of the envelope. Move the paper holding lever toward the equipment. When the envelope is placed, the menu for copying from MPT
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 53
    2.HOW TO MAKE COPIES 2 HOW TO MAKE COPIES 6 Press the button of the same size as the envelope you placed on the MPT. y ES9455 MFP: y ES9475 MFP Series: The size of the selected envelope will be registered as an "OTHER" size. 7 Press [OTHER] under "COPY". The paper size is now set to
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 54
    not to cut your fingers when fanning. y Do not push paper into the entrance of the MPT. This could cause a paper misfeed. 3 Align the side guides to the paper length. Move the paper holding lever toward the equipment. When paper is placed, the menu for copying from MPT appears. 4 Press [CUSTOM
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 55
    registered previously, press the desired button from [MEMORY 1] to [MEMORY 4], and then press [OK]. To register dimension data into the memory, see the following page: P.54 "Registering non-standard size in the memory" 6 Select other copy modes as required, and then press the [
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 56
    2 HOW TO MAKE COPIES ‰ Registering non-standard size in the memory 1 Follow the same procedure noted in steps 1 to 4 in "Copying from MPT on nonstandard size paper" ( P.52). 2 Register dimensions. 1) Select a desired memory number. 2) Press [Length] and key in the value. (100 mm to 297 mm (3.94" to
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 57
    74 Sort/Group mode...78 Rotate sort mode ...80 Staple sort mode ...81 Magazine sort / Center fold / Saddle stitch...85 Hole punch mode ...88 Manual staple mode ...90 Duplex Copying ...91 Making a 1-sided copy ...92 Making a 2-sided copy ...93 Making a 2-sided copy from a book-type original 94
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 58
    1 Automatic Paper Selection (APS) 1-sided original -> 1-sided copy Manual adjustment FULL COLOR TEXT/PHOTO When using the original glass: NON-SORT mode The default settings are changeable. For details, refer to the MFP Management Guide. „ Confirming the set functions If you press [SETTINGS] on the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 59
    will be cleared if the equipment is left idle for 45 sec. (default setting). For how to change this period, refer to the MFP Management Guide. „ Restrictions on function combinations Several copy functions can be used together. However some functions may not be used with other ones. For details
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 60
    ES9475 MFP Series. y For the original sizes detectable, see the following page: P.27 "Acceptable originals" y Some original sizes may not be detected with this function. In this case, select the desired size manually. P.59 "Selecting desired paper manually in the tray, the data of the A4 original
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 61
    3.BASIC COPY MODES „ Selecting desired paper manually 3 BASIC COPY MODES When paper of the size you want to use is not in any tray, place it in a tray or on the MPT. P.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 62
    -R, B4, B5, FOLIO 1 Place paper in the tray(s). The MPT cannot be used. Use the trays. 2 Adjust the side guides to the widest original, and then align the originals against the side guide on the front side. When original widths are the same When original widths are not the same When copying
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 63
    3.BASIC COPY MODES 4 Press [MIXED SIZE]. 3 BASIC COPY MODES 5 Press [AMS] to make copies on paper in one size. To make copies on paper of the same size as the originals, press [OK] or [CANCEL] so that the menu returns to the BASIC menu, and then press [APS]. When [AMS] is selected: y In the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 64
    whose colors are light y When black originals are copied in full colors Example: - Yellowish originals - Originals with a colored background The sensitivity to detect whether the data scanned in auto color are color or black can be changed. For details, refer to the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 65
    art) only Originals with photogravure (e.g. magazine, brochure) Originals with general photographs on photographic printing The default setting can be changed in each color mode. For details, refer to the MFP Management Guide. 1 Press [ORIGINAL MODE] on the touch panel. 2 Select the original mode,
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 66
    the density level of originals and automatically adjusts the density level of the copied image to the optimal one. Alternatively, you can manually adjust it to the desired level. Adjusting automatically (automatic density adjustment) Press [AUTO] on the touch panel. The default setting of the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 67
    for originals on the original glass is available only for ES9455 MFP / ES9475 MFP Series. Specifying both original size and copy paper size separately: such as when copying OHP film originals. Specifying reproduction ratio manually: You can select the desired reproduction ratio by pressing [ZOOM
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 68
    3 BASIC COPY MODES 3 Select the desired paper size, press [AMS] and then [OK]. y If you want to select a paper size other than the following, you need to register the size as "OTHER". Once you register this size, it will be specified every time you press [OTHER] on the touch panel. North America: LD
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 69
    3.BASIC COPY MODES 3 Press [ZOOM] on the touch panel. 3 BASIC COPY MODES 4 Select the desired sizes for the original and copy paper, and then press [OK]. y If you want to select a size other than the following for the original size and copy paper size, you need to register the size as "OTHER".
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 70
    MODES 1 Press [SIZE SETTING] on the touch panel. 2 Select the desired size. y ES9455 MFP: y ES9475 MFP Series: The selected size will be registered as an "OTHER" size. „ Specifying reproduction ratio manually 1 Place paper in the tray(s). 2 Place the original(s). 68 Enlargement and Reduction Copying
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 71
    3.BASIC COPY MODES 3 Press [ZOOM] on the touch panel. 3 BASIC COPY MODES 4 Press the buttons below to select the desired reproduction ratio. [ UP] and [ DOWN] buttons The reproduction ratio changes by 1% every time either of them is pressed. When you hold either down, the ratio goes up or down
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 72
    3 BASIC COPY MODES 5 Select the desired size, and then press [OK]. y If you want to select a paper size other than the following, you need to register the size as "OTHER". Once you register this size, it will be specified every time you press [OTHER] on the touch panel. North America: LD, LG, LT, ST
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 73
    3.BASIC COPY MODES 3 BASIC COPY MODES „ Copying photo originals in the optimal reproduction ratio for copy paper size (PHOTO ZOOM) 1 Place paper in the tray(s). 2 Place the original on the original glass in a landscape direction. 3 Press [ZOOM] on the touch panel. 4 Press [PHOTO ZOOM].
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 74
    size for the [3" x 5"] button is 3.5" x 5.0". When the size of the original is other than the ones below, key in the dimension of the original manually. North America: 3" x 5", 4" x 6", 5" x 7" or 8" x 10" Other than North America: 9 x 13 cm, 10 x 15 cm, 13 x 18 cm or 20 x 30 cm P.73 "Setting photo
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 75
    3.BASIC COPY MODES 3 BASIC COPY MODES 8 Place the next original, and then press [NEXT COPY] on the touch panel or the [START] button on the control panel. Scanning of the next original starts. If you have more than one original, repeat this step until the scanning of all the originals is finished.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 76
    88) Copies exit with their side punched. Manual staple ( P.90) Copies are stapled manually. The available finishing modes differ depending on MJ-1036 (for ES9455 MFP and ES9465 MFP) y Finisher MJ-1107 (for ES9475 MFP Series) y Saddle Stitch Finisher MJ-1108 (for ES9475 MFP Series) Hole Punch Unit
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 77
    sort & center fold Magazine sort & saddle stitch Hole punch Manual staple Finishing mode Non-sort Non-staple Sort Group Rotate sort sort Center fold Saddle stitch Magazine sort & center fold Magazine sort & saddle stitch Hole punch Manual staple MJ-1107 & MJ-6104 Yes Yes Yes Yes Yes Yes - - - - Yes
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 78
    3 BASIC COPY MODES ‰ Name of each part of the Finisher MJ-1036 21 3 MJ-1037 1 2 3 4 5 4 6 5 1. Upper cover 2. Receiving tray 3. Sub-tray 4. Hole Punch Unit MJ-6007 5. Front cover 1. Upper cover 2. Tray 3. Sub-tray 4. Saddle stitch tray 5. Front cover 6. Hole Punch Unit MJ-6008 MJ-1107 2 3 1 6
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 79
    3.BASIC COPY MODES 3 BASIC COPY MODES MJ-1108 3 21 4 5 9 8 7 1. Upper stacker 2. Tray holder 3. Lower stacker 4. Sub-tray 5. Saddle stitch tray 6. Stopper 7. Front cover 8. Hole Punch Unit MJ-6104 9. Stapling control section 6 Using the tray holder Open the tray holder when the length of the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 80
    3 BASIC COPY MODES „ Sort/Group mode When you make more than one set of copies, they can be made to exit in the same page order as that of the originals. This mode is called the sort mode. Copies can also be made to exit grouped by page. This mode is called the group mode. Sort mode Group mode 1 2
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 81
    3.BASIC COPY MODES 4 Select [SORT] or [GROUP], and then press [OK]. 3 BASIC COPY MODES 5 Key in the desired number of copies. 6 Select other copy modes as required, and then press the [START] button on the control panel. Selecting Finishing Mode 79
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 82
    3 BASIC COPY MODES „ Rotate sort mode When you make more than one set of copies, one set can be made to exit on top of another set, alternating in portrait and landscape directions. This mode is called the rotate sort mode. Use 2 trays and 2 stacks of paper of the same size. Place one stack of paper
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 83
    3.BASIC COPY MODES 4 Select [ROTATE SORT], and then press [OK]. 3 BASIC COPY MODES 5 Key in the desired number of copies. 6 Select other copy modes as required, and then press the [START] button on the control panel. „ Staple sort mode When you make more than one set of copies, the copied paper
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 84
    3 BASIC COPY MODES 3 Press [FINISHING] on the touch panel. 4 Select the desired stapling position from [FRONT STAPLE], [DOUBLE STAPLE] or [REAR STAPLE], and then press [OK]. 5 Select other copy modes as required, and then press the [START] button on the control panel. When the number of sheets
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 85
    to 110 lb. Index), ES9475 MFP Series: 106 to 256 g/ m2 (29 lb. Bond to 140 lb. Index)) can be added. In this case, the number of sheets available includes the 2 cover sheets. y For the maximum number of sheets loadable on the tray, refer to the Quick Start Guide. Saddle Stitch Finisher MJ
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 86
    3 BASIC COPY MODES y 2 cover sheets (60 to 256g/m2 (16 lb. Bond to 140 lb. Index)) can be added. In this case, the number of sheets available includes the 2 cover sheets. y For the maximum number of sheets loadable on the tray, refer to the Quick Start Guide. 84 Selecting Finishing Mode
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 87
    3.BASIC COPY MODES 3 BASIC COPY MODES „ Magazine sort / Center fold / Saddle stitch You can copy more than one original and bind them in a booklet format (Magazine sort). With the Saddle Stitch Finisher, you can also have the copied booklet folded at its center (Center fold) and besides stapled (
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 88
    3 BASIC COPY MODES Requirements for center folding Saddle Stitch Finisher MJ-1108 Paper size Paper weight A3, A4-R, B4, 60 - 105 g/m2 LD, LT-R, LG (16 - 28 lb. Bond) Maximum number of sheets available for center folding *1 25 sheets Maximum number of sets loadable on the saddle stitch tray 21
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 89
    3.BASIC COPY MODES 3 BASIC COPY MODES The magazine sort mode can also be selected on the EDIT menu. If you select it on the EDIT menu, you can adjust the binding margin. For details, see the following page: P.115 "Magazine Sort Mode" 1 Place paper in the tray(s). Special paper such as OHP film or
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 90
    3 BASIC COPY MODES 5 Select the desired mode from [MAGAZINE SORT], [MAGAZINE SORT & CENTER FOLD], [MAGAZINE SORT & SADDLE STITCH], [CENTER FOLD] or [SADDLE STITCH]. Then press [OK]. y [MAGAZINE SORT & SADDLE STITCH] and [SADDLE STITCH] are selectable only when the Saddle Stitch Finisher MJ-1108 or
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 91
    3.BASIC COPY MODES 3 Press [FINISHING] on the touch panel. 3 BASIC COPY MODES 4 Select [HOLE PUNCH], and then press [OK]. 5 Select other copy modes as required, and then press the [START] button on the control panel. Selecting Finishing Mode 89
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 92
    stapling has finished. Then remove the stapled paper. Be sure that your hands are away from the paper while stapling is in progress. Finishing the manual staple mode Remove the stapled paper from the lower stacker, and then press the stapling button. The shutter of the paper exit area closes. This
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 93
    original -> 2-sided copy ( P.93) Book-type original -> 2-sided copy ( P.94) -1-31-3- -12- -15- -12- -13- -15- y ES9455 MFP: Use plain or THICK1 for duplex copying. y ES9475 MFP Series: Use plain, recycled paper, THICK1, THICK 2, THICK 3, or SPECIAL 1 for duplex copying. Duplex Copying 91
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 94
    3 BASIC COPY MODES „ Making a 1-sided copy When you copy 2-sided portrait originals which open to the left/right on only 1 side of the paper, use the image direction function on the EDIT menu so that all the copied paper will exit in the proper direction. P.134 "Image Direction" "IMAGE DIRECTION"
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 95
    3.BASIC COPY MODES „ Making a 2-sided copy 3 BASIC COPY MODES If 1-sided portrait originals have been placed in a landscape direction and you copy them on both sides of the paper, copied sheets are usually in the open to top/bottom direction. You can make copies in the open to left/right direction
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 96
    3 BASIC COPY MODES 5 Select other copy modes as required, and then press the [START] button on the control panel. When placing the original on the original glass, follow steps 6 and 7 on P.33 "Basic copying procedure". „ Making a 2-sided copy from a book-type original You can make 2-sided copies
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 97
    3.BASIC COPY MODES 4 Select the book copying type. 3 BASIC COPY MODES Example: If pages 2 to 6 of a book which opens to the left are to be copied, select [LEFT -> LEFT]. 2 3 6 7 5 Press [OK]. The menu returns to the BASIC menu. 6 Press the tray button corresponding to the desired paper size.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 98
    3 BASIC COPY MODES 7 Select other copy modes as required. If the copy needs a binding space, select the book margin mode on the EDIT menu. P.105 "Creating bookbinding margin" 8 Place the original on the original glass. Place the original with its bottom toward you, aligning its center with the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 99
    . The data can be stored in any of PDF, TIFF and XPS formats. y The data will be stored as black images. (Resolution: 600 dpi only) The data stored with the TopAccess Guide. y It is recommended to back up the data stored in the share folder. When the hard disk is installed, you can store data in an
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 100
    can select up to 2 of [MFP LOCAL], [REMOTE 1] and [REMOTE 2]. If the hard disk is not installed, you cannot select [MFP LOCAL]. Furthermore, you can only select used. FILE FORMAT: Select the file format in which the data are stored from PDF, TIFF or XPS. XPS is available only when the hard disk
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 101
    control panel. When you finish the entry, press [OK]. SERVER NAME: Press this to enter the IP address of FTP server. For example, if the data should be transferred to an FTP folder ftp://10.10.70.101/user01/scan/, key in "10.10.70.101". NETWORK PATH: Press this to
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 102
    keys on the control panel. When you finish the entry, press [OK]. NETWORK PATH: Press this to enter a network path to the folder where the data are to be stored. LOGIN USER NAME: Press this to enter a user name to access the network folder. Enter this as required. PASSWORD: Press this
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 103
    EDITING FUNCTIONS 4. This chapter describes how to use various copying functions on the EDIT menu. Displaying EDIT Menu...102 Image Shift ...103 Creating top/bottom margin or left/right margin 103 Creating bookbinding margin ...105 Edge Erase...107 Book Center Erase ...108 Dual Page ...110 2IN1 /
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 104
    4 EDITING FUNCTIONS Displaying EDIT Menu You can display the EDIT menu by pressing the [EDIT] tab on the touch panel when you want to use various editing functions. The EDIT menu has 2 pages. To switch the pages, press or . 102 Displaying EDIT Menu
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 105
    4 EDITING FUNCTIONS Image Shift You can create a binding margin by shifting an image to the left, right, top or bottom of the copy paper. This function is called "image shift". It is useful when you wish to punch or staple a stack of paper after copying it. With this function you can easily make a
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 106
    4 EDITING FUNCTIONS 5 Adjust the width of the binding margin. 1) Press [FRONT MARGIN] and adjust the binding margin width on the front side using [ 0 mm] (0") and [ 100 mm] (3.94"). (The width on the back side will be also adjusted in the same way.) 2) Press [BACK MARGIN] and adjust the binding
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 107
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS „ Creating bookbinding margin You can easily make a binding margin when you copy a book-type original on both sides of the paper. P.94 "Making a 2-sided copy from a book-type original" 1 Press [IMAGE SHIFT] on the EDIT menu. 2 Press [BOOK]. 3 Adjust the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 108
    4 EDITING FUNCTIONS 4 Press [OK]. Select the "Book-type original -> 2-sided copy" mode as well. P.94 "Making a 2-sided copy from a book-type original" 106 Image Shift
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 109
    4 EDITING FUNCTIONS Edge Erase You can whiten the edge of the copied image when a shadow-like dark part appears on it. This function is called "edge erase". It is useful when you want to make the copied image neat and clear if the edge of the original is dirty or torn. Only standard size originals
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 110
    4 EDITING FUNCTIONS Book Center Erase You can whiten the center of the copied image when a shadow-like part appears on it. This function is called "book center erase". It is useful when you copy book-type originals. Book center erase set No setting 1 Place paper in the tray(s). When using
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 111
    4.EDITING FUNCTIONS 4 Adjust the width of the part to be erased. 1) Press either [ 2 mm] (0.08") or [ 50 mm] (1.97"). 2) Press [OK]. 4 EDITING FUNCTIONS 5 Place the original on the original glass. Place the original with its bottom toward you, aligning its center with the yellow indicator under
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 112
    4 EDITING FUNCTIONS Dual Page You can copy the 2 facing pages of a book-type original or 2 original sheets placed side by side onto 2 separate sheets of paper or on both sides of 1 sheet of paper. This function is called "dual page". You do not have to shift the original on the original glass. -12-
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 113
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS 5 Press the [BASIC] tab to display the BASIC menu, and then select A4, B5 or LT as the copy paper size. When using Copying from MPT, be sure to set the paper size. 6 Open the desired page of the original and place it on the original glass. Place the original
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 114
    4 EDITING FUNCTIONS 2IN1 / 4IN1 You can copy 2 or 4 originals to 1 sheet of paper by shrinking them. This function is called "2IN1" or "4IN1". If you use this function together with duplex copying, you can make a total of 8 images on 1 sheet of paper. The illustrations below show how you can arrange
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 115
    4.EDITING FUNCTIONS 1 Place paper in the tray(s). When using Copying from MPT, be sure to set the paper size. 4 EDITING FUNCTIONS If you select paper of a different size to that of the original, press [ZOOM] on the BASIC menu. Next select the desired paper size, press [AMS] and then [OK] in the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 116
    4 EDITING FUNCTIONS 5 Select other copy modes as required, and then press the [START] button on the control panel. When the originals are placed on the RADF, scanning and copying start. When they are placed on the original glass, follow steps 6 and 7. 6 Place the next original, and then press [NEXT
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 117
    4 EDITING FUNCTIONS Magazine Sort Mode You can copy more than one original in the book-type page order. This mode is called the magazine sort mode. Also you can do this as well as fold and staple the copied sheets at their center. This mode is called the magazine sort & saddle stitch mode. Magazine
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 118
    4 EDITING FUNCTIONS 4 Press [MAGAZINE SORT] on the EDIT menu. 5 Set the saddle stitch mode and the binding margin width as required. 1) When setting the saddle stitch mode, press [STAPLE ON]. If not required, press [STAPLE OFF]. 2) Press either [ 2 mm] (0.08") or [ 30 mm] (1.18") to adjust the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 119
    4 EDITING FUNCTIONS Image Editing You can select the various editing functions shown below for scanned images. Trimming: You can select a certain area of an original and copy only the selected area. Masking: You can mask a certain area of an original and copy only the unmasked area. Mirror image:
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 120
    4 EDITING FUNCTIONS 3 Select [TRIM] or [MASK]. 4 Place the original on the original glass with its face up. Place it with its bottom toward you. Align its top left corner against that of the original glass so that the original will be aligned with the original scales. Do not place any heavy objects
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 121
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS 6 Key in the read values. 1) Press [X1], [X2], [Y1] and [Y2], and then key in the read values correspondingly. 2) You can specify up to 4 areas on 1 page. When you want to specify more than one area, press [AREA 1] to [AREA 4] to switch the area, and then
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 122
    4 EDITING FUNCTIONS „ Mirror image / Negative/positive reversal You can reverse an image like a mirror (mirror image), or you can reverse light-and-dark of an image (negative/positive reversal). Mirror image Negative/Positive reversal Negative/positive reversal is available only when BLACK or
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 123
    4 EDITING FUNCTIONS XY Zoom You can change the reproduction ratio in both vertical and horizontal directions separately. This function is called "XY zoom". 100% 100% 200% 200% The reproduction ratio is changeable from 25 to 400%. However in the following cases, this range is 25 to 200%. y When
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 124
    4 EDITING FUNCTIONS 4 Set the reproduction ratio in both vertical and horizontal directions. 1) Press [X], and then press either [ 25%] or [ 400%] for a horizontal direction. 2) Press [Y], and then press either [ 25%] or [ 400%] for a vertical direction. 3) Press [OK]. 5 Select other copy modes as
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 125
    4 EDITING FUNCTIONS Cover Sheet You can add a special type of paper such as colored paper as a front cover sheet or a back cover sheet. This function is called "cover sheet". In the cover sheet mode, you can select whether or not to copy the front or back cover sheet as shown in the table below.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 126
    4 EDITING FUNCTIONS 5 Select the front and back cover settings, and then press [OK]. You can select [BOTH COPIED] for the front or back cover sheet only when [1->2 DUPLEX] or [2->2 DUPLEX] is set for the 2-sided copy mode on the basic menu. 6 Press the [BASIC] tab to display the BASIC menu. Then
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 127
    4 EDITING FUNCTIONS Sheet Insertion You can insert a special type of paper such as colored paper at the desired page. This function is called "sheet insertion". You can insert up to 2 types of sheets for a total of 50 pages. The sheet insertion mode has the following 2 types: COPIED: Inserts a
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 128
    4 EDITING FUNCTIONS 5 Select either [COPIED] or [BLANK]. 6 Select the page where the insertion sheets will be inserted. 1) Select the type of the insertion sheets ([INSERT SOURCE 1] or [INSERT SOURCE 2]). 2) Key in page numbers (1 to 1000) where the insertion sheets will be inserted, and then press
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 129
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS 8 Select other copy modes as required, and then press the [START] button on the control panel. When the originals are placed on the RADF, scanning and copying start. When they are placed on the original glass, follow steps 9 and 10. 9 Place the next original
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 130
    4 EDITING FUNCTIONS Time Stamp You can add the date and time on the copied paper. Printed at the bottom of a portrait copy Printed at the top of a landscape copy YYYY.MM.DD 14:54 YYYY.MM.DD 14:54 1 Place paper in the tray(s). 2 Place the original(s). 3 Press [TIME STAMP] on the EDIT menu. 4
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 131
    Page Number You can add a page number on the copied paper. Printed at the bottom center of a portrait copy 1 2 3 4 EDITING FUNCTIONS Printed at the top right of a landscape copy 1 2 3 1 Place paper in the tray(s). 2 Place the original(s). 3 Press [PAGE NUMBER] on the EDIT menu. 4 Select the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 132
    4 EDITING FUNCTIONS 5 Specify the page number you want to start with. 1) Key in the page number. 2) Press [OK]. 6 Select other copy modes as required, and then press the [START] button on the control panel. 130 Page Number
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 133
    4 EDITING FUNCTIONS Job Build You can scan several stacks of originals whose settings are individually different, and then copy or store them in one operation. This function is called "job build". For example, news clips (in the TEXT mode) and photographs in magazines (in the PHOTO mode) in A3 size
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 134
    4 EDITING FUNCTIONS 2 Press [OK]. Job build is now set and the message below appears. 3 Place the first stack of originals, and then select settings. y When placing the original on the original glass, remember that 1 page is equal to 1 job. y When placing mixed-size originals on the RADF, see the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 135
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS 4 Press the [START] button on the control panel. Scanning starts. When the scanning of all the originals is finished, the message below appears. 5 Place the next stack of originals, and then select the settings. Repeat steps 4 and 5 until all the desired
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 136
    4 EDITING FUNCTIONS Image Direction When you make 1-sided portrait originals to 2-sided copy by placing them in a landscape direction, normally the copied pages are "open to top". With this function you can make them "open to left". This function is called "image direction". When you make 2-sided
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 137
    4.EDITING FUNCTIONS 5 Press [OK]. 4 EDITING FUNCTIONS Image direction is now set. 6 Select other copy modes as required, and then press the [START] button on the control panel. Image Direction 135
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 138
    4 EDITING FUNCTIONS Book - Tablet As for the directions of originals or copied images, "open to left" is called "book" and "open to top" is called "tablet". With this function you can make 2-sided originals to 2-sided copy, rotating only the back side of the copied page by 180 degrees, namely, you
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 139
    4 EDITING FUNCTIONS ADF -> SADF You can switch the feeding mode when the RADF (Reversing Automatic Document Feeder) is used, from "ADF" to "SADF". The paper feeding mode has 2 types as follows: ADF (Continuous feed mode): Feeds originals continuously when you press the [START] button on the control
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 140
    4 EDITING FUNCTIONS 5 Place the original(s) on the RADF one sheet at a time. The original is pulled into the RADF automatically, and then the menu below appears. Repeat step 5 if you have another original. The placed original will be pulled into the RADF automatically even if you do not press [NEXT
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 141
    4 EDITING FUNCTIONS Full Image You can copy the entire image of an original including any fine text at its edge. This function is called "full image". With this function, the image will be copied with its reproduction ratio reduced by approx. 1 to 5%. 1 Place paper in the tray(s). 2 Place the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 142
    4 EDITING FUNCTIONS Image Repeat You can copy a certain area on an original repeatedly in the times that you specified. This function is called "image repeat". y You can repeat copying up to 8 times. y Only standard size originals are available. When registering this function into a template, be
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 143
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force. Breaking the glass could injure you. 4 Read the following 4 values to specify the area using the left and top scales on the original glass. X1:
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 144
    back sides of the originals and the copies will not match. The sensitivity to detect blank pages can be changed. For details, refer to the MFP Management Guide. 1 Place paper in the tray(s). When using Copying from MPT, be sure to set the paper size. 2 Place the original(s). 3 Press [OMIT BLANK PAGE
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 145
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS 5 Select other copy modes as required, and then press the [START] button on the control panel. Scanning and copying start. A message notifying you of the number of the blank sheets appears for approx. 5 seconds. Omit Blank Page 143
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 146
    the RADF or the Original Cover closed fully. y When this function is enabled, the automatic density adjustment is disabled. Adjust the density level manually. y Originals with an intricate outer shape (e.g. an original with cut-out parts on its edge) may not be copied properly because this function
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 147
    4.EDITING FUNCTIONS 4 EDITING FUNCTIONS 4 Set "outside erase". 1) Press [ON]. 2) Adjust the width of the border around the original by pressing either or as required. When you adjust it to the side, the area to be detected as not belonging to the original is widened. When you adjust it to the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 148
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 149
    IMAGE ADJUSTMENT 5. This chapter describes the image adjustment functions allowing you to change the overall color balance of a copied image, copy an original in a specified color, and so on. Displaying IMAGE Menu ...148 Using Image Adjustment Functions 149 Color balance (YMCK adjustment) ...149
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 150
    5 IMAGE ADJUSTMENT Displaying IMAGE Menu You can display the IMAGE menu by pressing the [IMAGE] tab on the touch panel when you want to use various image adjustment functions. 148 Displaying IMAGE Menu
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 151
    5 IMAGE ADJUSTMENT Using Image Adjustment Functions „ Color balance (YMCK adjustment) This function allows you to adjust the overall color balance of the copied image by changing the strength of YELLOW (Y), MAGENTA (M), CYAN (C) and BLACK (K). This function is available in the full color mode or
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 152
    5 IMAGE ADJUSTMENT 3 Press or of the color on each density area to obtain the desired color balance. For example, when you adjust the high density area of magenta (M) to the area becomes darker. After completing the adjustment, press [OK]. side, the magenta in its high density Canceling color
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 153
    5.IMAGE ADJUSTMENT 5 IMAGE ADJUSTMENT „ RGB adjustment This function allows you to adjust the overall color balance of the copied image by changing the strength of RED (R), GREEN (G) and BLUE (B). This function is available in the full color mode or the auto color mode. RED (R) GREEN (G) BLUE
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 154
    5 IMAGE ADJUSTMENT „ One-touch adjustment This function allows you to obtain the image quality already registered in this equipment. You can select the image quality from "WARM", "COOL", "VIVID", "CLEAR" and "MARKER". This function is available only in the full color mode. WARM COOL VIVID CLEAR
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 155
    5.IMAGE ADJUSTMENT 5 IMAGE ADJUSTMENT „ Background adjustment This function allows you to adjust the density of the original's background. It avoids the back side of a 2-sided original becoming visible on its front side. Front Back Adjusted to have a lightened background Not adjusted This
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 156
    5 IMAGE ADJUSTMENT „ Sharpness This function allows you to emphasize or blur the outline of the image. 1 Press [SHARPNESS] in the IMAGE menu. 2 Press [SOFT] or [SHARP] to adjust the sharpness, and then press [OK]. When the sharpness level is adjusted to the [SOFT] side, the moire fringes on the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 157
    5.IMAGE ADJUSTMENT 5 IMAGE ADJUSTMENT „ Twin color copying This function allows you to copy a colored original in 2 specified colors. There are 2 types of twin color copying as follows: TWIN COLOR SELECTABLE: The black part and the parts other than black in the original are copied in 2 specified
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 158
    5 IMAGE ADJUSTMENT 2 Press [TWIN COLOR SELECTABLE]. 3 Select a color for the parts other than black in the original. 1) Press [SECOND COLOR]. 2) Select the desired color. 4 Select a color for the black part in the original. 1) Press [CHANGE BLACK TO]. 2) Select the desired color. After selecting the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 159
    5.IMAGE ADJUSTMENT 5 IMAGE ADJUSTMENT 5 Press or of the color to obtain the desired color balance. After completing the adjustment, press [OK]. This is the end of the setting. If you want to adjust each color balance on every density area, press [DETAIL] and go to the next step. 6 Press or of the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 160
    5 IMAGE ADJUSTMENT 2 Press [RED & BLACK]. 3 To adjust the red color or the red-and-black area, press [ADJUST]. If you do not want to adjust the color, press [OK]. If you do not adjust the red color or the red-and-black area, this is the end of the setting. If you want to adjust it, go to the next
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 161
    5.IMAGE ADJUSTMENT 5 IMAGE ADJUSTMENT 5 Press or on each density area to obtain the desired color balance. For example, when you adjust the high density area of magenta (M) to the area will become darker. After completing the adjustment, press [OK]. side, the magenta in its high density
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 162
    5 IMAGE ADJUSTMENT „ Mono color copying This function allows you to make copies in a single color except black. BLUE 1 Press [MONO COLOR] in the IMAGE menu. 2 Press the button corresponding to the desired color. Canceling mono color copying Press [RESET]. 160 Using Image Adjustment Functions
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 163
    5.IMAGE ADJUSTMENT 5 IMAGE ADJUSTMENT „ Hue This function allows you to adjust the hue of the basic color. This function is available in the full color mode or the auto color mode. 1 Press [HUE] in the IMAGE menu. 2 Adjust the hue. 1) Adjust the hue of the entire image by pressing 2) Adjust the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 164
    5 IMAGE ADJUSTMENT „ Saturation This function enables you to adjust the color saturation of the entire image. This function is available in the full color mode or the auto color mode. 1 Press [SATURATION] in the IMAGE menu. 2 Press or to adjust the saturation, and then press [OK]. Canceling
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 165
    group 167 Creating a new private group ...170 Registering templates into a private group ...171 Recalling Templates...173 Changing Data ...176 Changing private group data ...176 Changing template data ...177 Deleting Groups or Templates 179 Deleting private groups...179 Deleting templates...180
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 166
    6 TEMPLATES Templates You can create a template with several functions that are frequently used so that they can be employed whenever you want by recalling the template, thus eliminating the need to perform complicated settings every time. Templates can be used in copying, scanning and sending a fax
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 167
    multi) Original: 2-sided Color mode: FULL COLOR Original mode: TEXT Storing method: Stored in the share folder of this equipment as a high-compression PDF file (multi) Original: 1-sided Color mode: BLACK Original mode: TEXT/PHOTO Resolution: 400 dpi Storing method: Stored in the share folder of this
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 168
    6 TEMPLATES Templates with e-Filing functions *2 Button Function *1 Color mode: AUTO COLOR Original mode: TEXT/PHOTO Simplex/Duplex: 1 -> 1 SIMPLEX Storing method: Stored in the e-Filing box No copying Color mode: AUTO COLOR Original mode: TEXT/PHOTO Simplex/Duplex: 2 -> 1 SPLIT Storing method:
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 169
    6 TEMPLATES Registering Templates Templates must be registered to either the "public template group" or "private groups". You can set a password to restrict the use of registered templates. Public template group: Provided by default. Templates in this group can be used by everyone. It is useful to
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 170
    6 TEMPLATES 4 Press [PASSWORD]. The on-screen keyboard appears. 5 Enter the Admin Password using the on-screen keyboard or the digital keys. Then press [OK]. 6 Select a template. 1) Press a blank button. 2) Press [SAVE]. To switch the menu Press or . 168 Registering Templates
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 171
    6.TEMPLATES 7 Enter the necessary information about the template. 6 TEMPLATES NAME 1 & 2: Enter the name of the template. NAME 1 appears above the template button and NAME 2 appears below. Be sure to enter at least one of them. When you press either of them, the on-screen keyboard appears. Enter
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 172
    6 TEMPLATES Even when the automatic start function is enabled, you need to enter the user name and password when recalling the template in the following cases. For details of the User Authentication for Scan to E-mail and the user management function, ask your administrator. y When the User
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 173
    6.TEMPLATES 3 Enter the necessary information about the group. 6 TEMPLATES NAME: Enter the name of the group. When you press it, the on-screen keyboard appears. Enter within 20 characters. Be sure to enter it. USER NAME: Enter the name of the group owner as required. When you press it, the on-
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 174
    6 TEMPLATES 2 Press [TEMPLATE] on the touch panel. The template menu appears. 3 Select the desired group. 1) Press the [REGISTRATION] tab. 2) Select the desired group by pressing its button or keying in its group number (3 digits). 3) Press [OPEN]. To switch the menu Press or . 4 Key in the password
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 175
    6 TEMPLATES Recalling Templates When you recall a template, the functions set in the template will be available automatically. If the automatic start function is enabled, this equipment will automatically start the operation of each function when you press the button for the corresponding template.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 176
    6 TEMPLATES 5 Key in the password when you have selected the private group. (If no password is set, go to step 6.) 1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital keys on the control panel. 2) Press [OK]. 6 Press the button for the desired template.
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 177
    6.TEMPLATES 6 TEMPLATES 8 Confirm that "Updated the template setting" is displayed on the touch panel. The message is displayed for approx. 3 seconds. 9 Select other copy modes as required, and then press the [START] button on the control panel. Recalling Templates 175
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 178
    but this cannot be done from the control panel. For how to change them from the TopAccess menu, refer to the TopAccess Guide. „ Changing private group data 1 In the template menu, select the desired group. 1) Press the [REGISTRATION] tab. 2) Select the desired group by pressing its button or keying
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 179
    6.TEMPLATES 6 TEMPLATES „ Changing template data 1 In the template menu, select the group to which the desired template is registered. 1) Press the [REGISTRATION] tab. 2) Select the on the touch panel or the digital keys on the control panel. If no password is set, go to step 3. Changing Data 177
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 180
    [PASSWORD] and then enter the password with the buttons on the touch panel or the digital keys on the control panel. 2) Press [OK]. 5 Change the data following step 7 on P.167 "Registering templates into the public template group". 178 Changing
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 181
    6 TEMPLATES Deleting Groups or Templates You can delete private groups or templates no longer needed. If a private group is deleted, all the templates in the private group are also deleted. The public template group cannot be deleted. „ Deleting private groups 1 In the template menu, select the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 182
    6 TEMPLATES 3 Press [DELETE]. The private group is now deleted. „ Deleting templates 1 In the template menu, select the group to which the desired template is registered. 1) Press the [REGISTRATION] tab. 2) Select the desired group by pressing its button or keying in its group number (3 digits). 3)
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 183
    6.TEMPLATES 3 Select the desired template. 1) Press the button for the desired template. 2) Press [DELETE]. 6 TEMPLATES To switch the menu Press or . 4 Key in the password for the selected template. (If no password is set, go to step 5.) 1) Press [PASSWORD] and then enter the password with the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 184
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 185
    STATUS 7. This chapter describes how to confirm the processing status and the history of copy jobs performed, and the amount of toner remaining in the toner cartridges. Confirming Copy Job Status 184 Confirming jobs in progress or ones in waiting 184 Confirming copy job history ...189 Confirming
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 186
    in waiting, and change their order. You can also confirm the history of copy jobs performed, the status of trays and the amount of toner remaining in the toner cartridges. When this equipment is managed with the user management function, copy jobs in waiting only for a user who has logged in can
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 187
    7.CONFIRMING JOB STATUS 7 CONFIRMING JOB STATUS ‰ Deleting jobs You can delete jobs that you no longer need to print. 1 Select the desired job on the print job list, and then press [DELETE]. You can select more than one job. 2 Press [DELETE]. The job is now deleted. You cannot use the print job
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 188
    7 CONFIRMING JOB STATUS ‰ Pausing jobs Jobs whose status is "Wait" can be held in the queue (Pausing). Select the desired job on the print job list, and then press [PAUSE]. The job is now paused. The paused job is not printed even when its turn comes. Printing of the next job starts. Resuming the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 189
    7.CONFIRMING JOB STATUS ‰ Moving jobs You can change the order of the jobs in waiting by moving them within the list. 7 CONFIRMING JOB STATUS You can only move jobs from and to those whose status is "Wait". 1 Select the desired job on the print job list, and then press [MOVE]. 2 Select the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 190
    disk is installed. 1 Select the skipped job in the print job list, and press [RECOVERY INFORMATION]. 2 Resolve the cause of the skip following the instructions on the screen. If multiple causes exist, the second cause is displayed after you resolve the first one. Resolve all causes accordingly. 188
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 191
    7.CONFIRMING JOB STATUS „ Confirming copy job history You can confirm the history of copy jobs performed on the touch panel. 1 Press [JOB STATUS] on the touch panel. 2 Press the [LOG] tab. 7 CONFIRMING JOB STATUS 3 Press [PRINT]. The print log list appears. Copy jobs appear on the print log list
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 192
    7 CONFIRMING JOB STATUS „ Confirming trays You can confirm the size and type-setting of the paper or the amount remaining in the trays. During printing you can confirm which tray is feeding paper. 1 Press [JOB STATUS] on the touch panel. 2 Press the [SUPPLY] tab. During printing, the button for the
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 193
    7.CONFIRMING JOB STATUS „ Confirming amount of toner remaining You can confirm the approximate amount of toner remaining in the toner cartridge. 1 Press [JOB STATUS] on the touch panel. 2 Press the [TONER] tab. 7 CONFIRMING JOB STATUS Press [CLOSE] when you finish the confirmation. The menu
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 194
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 195
    OTHER INFORMATION 8. Continuous Copying Speed 194 Copying Function Combination Matrix 196 Combination matrix 1/2 ...196 Combination matrix 2/2 ...197 Image Adjustment Function Combination Matrix 198 Combination matrix 1/2 ...198 Combination matrix 2/2 ...199
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 196
    % reproduction ratio in the non-sort mode (unit: sheet/minute). ES9455 MFP Paper size A4, A5-R, B5, LT, ST-R, 8.5"SQ A4-R, B5 16.5 16.5 12.5 12.5 10 10 8 8 Color *1 16.5 16.5 12.5 12.5 10 10 8 8 ES9465 MFP Paper size Feeder A4, A5-R, B5, LT, ST-R, 8.5"SQ A4-R, B5-R, LT-R B4, FOLIO, LG, COMP,
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 197
    8.OTHER INFORMATION 8 OTHER INFORMATION ES9475 MFP Paper size Feeder A4, A5-R, B5, LT, ST-R, 8.5"SQ A4-R, copying from MPT speed when the paper size is specified is as listed above. y Oki-recommended paper is used for the values of the specifications above. y These specifications vary depending
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 198
    8 OTHER INFORMATION Copying Function Combination Matrix „ Combination matrix 1/2 196 Copying Function Combination Matrix Copying from MPT Mixed original sizes Photo zoom 1 - 1 Simplex 1 - 2 Duplex 2-sided 2 - 1 Split 2 - 2 Duplex Book - 2 Non-sort / Non-staple Sort Group Staple sort
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 199
    Copying Function Combination Matrix 197 Copying from MPT Mixed original sizes Photo zoom 1 - 1 Simplex 1 - 2 Duplex 2-sided 2 - 1 Split 2 - 2 Duplex Book - 2 Non-sort / Non-staple Sort Group Staple sort Finishing Magazine sort Magazine sort & Saddle stitch Hole punch Saddle stitch
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 200
    range selectable adjustment adjustment Sharpness Background adjustment Marker One touch adjustment Clear Vivid Cool Warm RGB Color adjustment balance Density Manual /Auto Full color Auto color Black Color mode Twin color copy ʊ Twin color selectable Twin color copy ʊ Red & Black
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 201
    Text image Text/Photo Mono color Color mode Twin color Twin color Black copy ʊ Red copy ʊ Twin & Black color selectable Auto color Full color Density Manual /Auto Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes No No No No No No
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 202
    8 OTHER INFORMATION 200 Image Adjustment Function Combination Matrix
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 203
    BUILD 131 MAGAZINE SORT 115 OMIT BLANK PAGE 142 OUTSIDE ERASE 144 PAGE NUMBER 129 SHEET INSERTION 125 TIME STAMP 128 XY ZOOM 121 end guide 14 Envelope 11, 12, 49 Equipment status indication area 8, 10 F Feeding mode 31 Finisher 74 Inner Finisher 74 name of each part 76 [FINISHING
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 204
    sort & center fold 74, 85 magazine sort & saddle stitch 74, 85 manual staple 74, 90 non-sort non-staple 74 rotate sort 74, 80 saddle 85 Magazine sort & center fold 74, 85 Magazine sort & saddle stitch 74, 85 Manual staple 74, 90 MAP 63 Message indication area 8 MONO COLOR 160 [MPT 10 MPT
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 205
    IMAGE 63 Private group changing private group data 176 creating 170 deleting 179 private group 154 SHEET INSERTION 125 Side guides of the MPT 42, 50, 52 Side guides of the RADF (Reversing Automatic 12 Thin paper 12 TIME STAMP 128 Toner remaining amount 191 TopAccess 176 Touch panel
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 206
    204 INDEX
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 207
    ES9455 MFP ES9465 MFP/ES9475 MFP
  • Oki ES9465 | ES9465/ES9475 Copying Guide - Page 208
    Oki Data Corporation 4-11-22 Shibaura, Minato-ku,Tokyo 108-8551, Japan www.okiprintingsolutions.com 45686001EE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS
Copying Guide
ES9455 MFP
ES9465 MFP/ES9475 MFP