Oki LP470s LP470, LP480 Quick Guide (English, Fran栩s, Espa?ol, Port - Page 31
Head check setting mode, DIP switch settings
View all Oki LP470s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Head check setting mode In the head check setting mode, a check can be performed in two checking areas: the printing area and the barcode printing area. The presence of the head check function and the head check range settings are set by the DIP switch (DSW) settings when the power is turned on, by button pressing status, and by the cover status. DIP switch settings DSW-1 DSW-2 DSW-3 DSW-4 (A) OFF ON OFF ON (B) ON OFF OFF ON DSW settings Button and cover status (A) PRINT button + cover open FEED button + cover open (B) PRINT button + cover open FEED button + cover open Function Head check range set as printing area Head check function set as disabled Head check range set as barcode printing area only Head check function set as disabled Default Head check range set as printing area DSW settings (A/B) + cover open + PRINT/FEED button + POWER Setting head check function (STATUS LED flashes green) Setting completes (STATUS LED lights green) Note: When the buzzer sound mode is enabled, the buzzer sounds upon startup. Release the PRINT/FEED button to stop the buzzer. To check the settings for head check setting mode, see the test print output (See p. 18). To end head check setting, confirm that the STATUS LED is on in green, then turn power off. After changing the head check setting mode, be sure to restore the DSW to their original settings. 31