Oki LP470s LP440, LP441, LP470, LP480 Printer Configuration Manual (English) - Page 15
Protocol setting
View all Oki LP470s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Printer configuration tool 6.4 Protocol setting Before starting communication with the printer, the printer setting tool needs to be set for enabling communication with the printer. 1. Select "Protocol (P)" in "Tool settings(T)" menu. Fig. 6-4-1 Tool setting (Protocol setting) selection screen 2. Change setting value, and click "Apply". Fig. 6-4-2 Tool setting (Protocol setting) screen Table6-4-2 Tool item setting (Protocol setting) list Item CRC check setting Setting range ON, OFF Control code setting ON, OFF Protocol code 00 - FF HEX setting Restrictions Only effective when printer uses wireless LAN or Bluetooth is active. The value being used in other protocol code cannot be set. When other control code and command, code included in printer data are specified as protocol code, printer operation is not warranted. 13