Oki LP470s LP440, LP441, LP470, LP480 Printer Configuration Manual (English) - Page 18

Get IP address automatically. DHCP

Get Oki LP470s PDF manuals and user guides View all Oki LP470s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Printer configuration tool Table7-2-2-1 Printer setting item list Item Initial value Setting range Operation mode SSID Channel *1 Power save mode *2 DHCP Infrastructure OKI 11 Disable (2) IP address Subnet mask Gateway address Port number Set only time out setting FTP time out LPD time out Socket connection time out 192.168.1.1 255.255.255.0 0.0.0.0 *3 1024 No check 30sec 30sec 60sec Infrastructure, Ad-hoc Specify 1-32 digit character string indicated by alphanumeric 1-14 channel *12-14 channel can set only for printers mounting IEEE 802.11g supported wireless LAN module. Disable, Mode1 - Mode5 (1) Get IP address automatically. (DHCP) (2) Set manually following IP address: IP address, Subnet mask, Gateway address. 0.0.0.0-255.255.255.255 0.0.0.0-255.255.255.255 0.0.0.0-255.255.255.255 1-9999 When checked, set only time out value. 30sec - 500sec 30sec - 500sec 0sec - 3600sec *1 Effective only when operation mode is ad-hoc. *2 Effective only when wireless LAN module is IEEE802.11 b/g and operation mode is infrastructure. *3 When the gateway address is set, make sure to set the same subnet address to IP address 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
Printer configuration tool
16
Table7-2-2-1 Printer setting item list
Item
Initial value
Setting range
Operation mode
Infrastructure
Infrastructure, Ad-hoc
SSID
OKI
Specify
1-32
digit
character
string
indicated
by
alphanumeric,"-","_"," ".
Channel
*1
11
1-14 channel
*12-14 channel can set only for printers mounting IEEE 802.11g
supported wireless LAN module.
Power save mode *2
Disable
Disable, Mode1 - Mode5
DHCP
(2)
(1) Get IP address automatically. (DHCP)
(2) Set manually following IP address: IP address, Subnet mask,
Gateway address.
IP address
192.168.1.1
0.0.0.0-255.255.255.255
Subnet mask
255.255.255.0
0.0.0.0-255.255.255.255
Gateway address
0.0.0.0 *3
0.0.0.0-255.255.255.255
Port number
1024
1-9999
Set only time out setting
No check
When checked, set only time out value.
FTP time out
30sec
30sec - 500sec
LPD time out
30sec
30sec - 500sec
Socket connection time
out
60sec
0sec - 3600sec
*1 Effective only when operation mode is ad-hoc.
*2 Effective only when wireless LAN module is IEEE802.11 b/g and operation mode is infrastructure.
*3 When the gateway address is set, make sure to set the same subnet address to IP address