Oki MC160MFP Safety Information - Page 8

Personal Protective Equipment, Engineering Controls, Spill Cleanup, Waste Disposal, Precautions, - okidata okidata

Page 8 highlights

Carcinogenicity IARC Carbon Black: Group 2B, "Possible Carcinogen." NTP: No components are listed. OSHA: Carbon black is designated hazardous according to OSHA 29 CFR 1910.1200. Reproductive Toxicity: Not available. Teratogenicity: Not available. Mutagenicity: Negative (AMES Test). Name of Toxicoligically Synergistic Products: Not available. Reactivity Data Stability: Stable except above 200°C (392°F). Conditions to Avoid: Electric discharge, throwing into fire. Polymerization: Will not occur. Hazardous Decomposition or Byproducts: CO, CO2, NOx and smoke. Incompatibility: Not available. Preventive Measures Personal Protective Equipment Respiratory Protection: Not normally required. For large spills, use dust respirator and goggles during cleanup. Protective Gloves and/or Eye Protection: Not normally required. For large spills, use rubber gloves and safety goggles during cleanup. Engineering Controls Ventilation: Outside of normal ventilation, not normally required. Other Protective Equipment and/or Hygienic Practices: None. Spill Cleanup Small Spills 1 . Remove sources of ignition. 2 . Carefully clean up the spill with a wet cloth, avoiding inhalation of fine dust. Large Spills 1 . Remove sources of ignition and keep unnecessary and unprotected personnel away from area. 2 . Wear protective gear: respirator, rubber gloves, safety goggles. 3 . Vacuum the spill, then wipe up remainder with a wet cloth. Waste Disposal • Vacuum or sweep material and place in a bag and hold for waste disposal. Use vacuum equipped with High Efficiency Particulate Air (HEPA) filter. Vacuum should be electrically bonded and grounded to dispel static electricity. To avoid dust generation, do not sweep dry. • Follow appropriate federal, state, and local regulations. Precautions Precautions for Handling or Storage: Do not breathe dust. Avoid contact with eyes. Other Precautions: None. Shipping Information Special Shipping Information: Non hazardous. Handle container carefully to avoid shock. Do not drop. Keep dry. UN Number: None. Hazards Class: None. User's Responsibility This bulletin cannot cover all possible situations which the user may experience when using this product. Each aspect of your operation must be examined in regard to if, or where, additional precautions may be necessary. All health and safety information contained in this bulletin must be provided to your employees or customers. It is your responsibility to use this information to develop appropriate work practice guidelines and employee instructional programs for your operation. Preparation Date of MSDS Date: October 1, 2009. Prepared by: Oki Data Americas, Inc Engineering Services Department. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Tel: (856) 235-2600 Fax: (856) 222-5320 http://www.okiprintingsolutions.com my.okidata.com  - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

8 - English
Carcinogenicity
IARC
Carbon Black: Group 2B, “Possible Carcinogen°
NTP:
No components are listed°
OSHA:
Carbon black is designated hazardous according to
OSHA 29 CFR 1910°1200°
Reproductive Toxicity:
Not available°
Teratogenicity:
Not available°
Mutagenicity:
Negative (AMES Test)°
Name of Toxicoligically Synergistic Products:
Not
available°
Reactivity Data ____________________
Stability:
Stable except above 200±C (392±F)°
Conditions to Avoid:
Electric discharge, throwing into fire.
Polymerization:
Will not occur°
Hazardous Decomposition or Byproducts:
CO, CO
2
, NO
x
and smoke°
Incompatibility:
Not available°
Preventive Measures ________________
Personal Protective Equipment
Respiratory Protection:
Not normally required° For large
spills, use dust respirator and goggles during cleanup°
Protective Gloves and/or Eye Protection:
Not normally
required° For large spills, use rubber gloves and safety
goggles during cleanup°
Engineering Controls
Ventilation:
Outside of normal ventilation, not normally
required°
Other Protective Equipment and/or Hygienic Practices:
None°
Spill Cleanup
Small Spills
Remove sources of ignition°
Carefully clean up the spill with a wet cloth, avoiding
inhalation of fine dust.
Large Spills
Remove sources of ignition and keep unnecessary and
unprotected personnel away from area°
Wear protective gear: respirator, rubber gloves, safety
goggles°
Vacuum the spill, then wipe up remainder with a wet
cloth°
Waste Disposal
Vacuum or sweep material and place in a bag and hold for
waste disposal. Use vacuum equipped with High Efficiency
Particulate Air (HEPA) filter. Vacuum should be electrically
bonded and grounded to dispel static electricity° To avoid
dust generation, do not sweep dry°
Follow appropriate federal, state, and local regulations°
Precautions
Precautions for Handling or Storage:
Do not breathe dust°
Avoid contact with eyes°
Other Precautions:
None°
Shipping Information
Special Shipping Information:
Non hazardous° Handle
container carefully to avoid shock° Do not drop° Keep dry°
UN Number:
None°
Hazards Class
: None°
User’s Responsibility ________________
This bulletin cannot cover all possible situations which the
user may experience when using this product° Each aspect of
your operation must be examined in regard to if, or where,
additional precautions may be necessary° All health and safety
information contained in this bulletin must be provided to your
employees or customers° It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation°
Preparation Date of MSDS ____________
Date:
October 1, 2009°
Prepared by:
Oki Data Americas, Inc
Engineering Services Department°
2000 Bishops Gate Blvd°
Mt° Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
http://www°okiprintingsolutions°com
my°okidata°com