Oki MC780f MC770/780 User Guide - Basic - Page 49
Specifying reproduction ratio manually, Place paper in the trays.
View all Oki MC780f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 Select other copy modes as required, and then press the [START] button on the control panel. Registering paper sizes to "OTHER" size If you want to select a size other than the following for the original size and copy paper size, you need to register the size as "OTHER" following the procedures below. Once you register this size, it will be specified every time you press [OTHER] on the touch panel. North America: LG, LT,ST Other than North America: A4, B5 BASIC COPY MODES Specifying reproduction ratio manually 1 Place paper in the tray(s). 2 Place the original(s). 3 Press [ZOOM] on the touch panel. 1 Note • You can register only standard sizes as [OTHER] and cannot register any non-standard sizes. 1 Press [SIZE SETTING] on the touch panel. 2 Select the desired size. 2 4 Press the buttons below to select the desired reproduction ratio. [ UP] and [ DOWN] buttons The reproduction ratio changes by 1% every time either of them is pressed. When you hold either down, 3 the ratio goes up or down automatically. One-touch zoom buttons Select the desired ratio from [400%], [200%], [100%], [50%] and [25%]. Note • When the RADF is used, the maximum ratio available is 200%. 4 5 The selected size will be registered as an "OTHER" size. 6 - 49 -