Oki MICROLINE 390 TURBO OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 136
Hardware Error Messages, check the printer settings. For example, if you are
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Section 4 - Appendix A - Troubleshooting Printing a Configuration Page If the status indicator turns solid orange due to an error and no configuration page is printed, your printer may be configured for PostScript operation. If so, you must re-configure your printer for standard ASCII mode so that the configuration page can be printed. If you do not know the configuration of the OkiLAN 6020e or you think the configuration has been changed, use the following method for printing a configuration page: • With the network cable detached, attach the OkiLAN 6020e to a printer and power cycle the print server. When the OkiLAN 6020e powers up, it will detect the detached network cable and print a configuration sheet. If no configuration sheet is printed and the indicator has turned green, check the printer and verify it is ready to print. If you are using boot protocols (RARP or BOOTP) to assign the IP address, the IP address will be listed as Using network protocol (0.0.0.0) on the configuration page. Unable to Print LPR/LP • If the indicator blinks green, the OkiLAN 6020e is receiving data. If nothing is actually printing, check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6020e is also set to PostScript. • Try pinging the OkiLAN 6020e by its IP address (not the hostname). This will verify the unit is functioning on the network. • If the ping succeeds, try ftping a test file to the print server. If the ping fails, you might have a configuration problem with the OkiLAN 6020e (the IP address or gateway address might be incorrect, etc.). IV - 54 OKI OkiLAN 6020e User's Guide