Oki OKIPOS 407II USBBlack Users Guide - Page 26
Full-Face Thermal Label Paper Roll
View all Oki OKIPOS 407II USBBlack manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
5-2. Full-Face Thermal Label Paper Roll (1) Label paper specification Backing paper width: 79.5±0.5 mm or 82.5±0.5 mm Outer roll diameter: ø100 mm or less Take up paper roll width: 80+-10.5 mm or 83+0.5 -1 mm Thickness: Max. 150 μm Core outer/inner diameter: core inner diameter ø25.4±1 mm/core outer diameter ø32±1 mm Printed surface: Outer edge of roll Tail end handling: Do not use paste or glue to secure the paper roll or its core. Do not fold the tail end of the paper. (2) Recommended label paper Manufacturer Product name Quality features/ applications Lintec Lintec LD2114 LD5530 For distribution or information control For measurement Ricoh 130LHB For distribution or information control Base material 65 Thickness (μm) Separator Total thickness 41 115 85 65 150 85 - - Adhesion type High adhesion High adhesion High adhesion Note: 1) Depending on the type and thickness of the paper, it may be necessary to change the settings for printing darkness. To change the darkness settings, use the printing darkness settings command 'd'n. Refer to the separate programmer's manual for details. 2) The print density may vary depending on the type of paper roll, operating environment, and power consumption mode. 3) A reader or scanner may not be able to scan a printed bar code or characters depending on the print density. Make sure that your reader or scanner is able to scan correctly beforehand. - 22 -