Oki PM4410 Setup Guide for the PM4410 - Page 18
Connect to the Computer/Network
View all Oki PM4410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connect to the Computer/Network Connecting the Parallel Port The parallel port is a standard IEEE-1284-compatible, 36-pin port. It requires a shielded IEEE-1284-compatible, bi-directional cable no longer than 6 ft. (1.8 m). 1. Open the port access cover. 2. Plug the interface cable into the parallel port and secure it with the wire loops. 3. Close the port access cover, and attach the other end of the cable to the computer and secure it with the screws. Default settings for the parallel interface (see Section 1 of your on-line Pacemark 4410 User's Guide for information on changing Menu settings): I Prime = Buffer Print Pin 18 = +5V Auto Feed XT = Invalid (Epson FX emulation only) BiDirection = Enable E-16 Untitled-1 Pacemark 4410 Setup Guide 16 11/30/98, 1:29 PM