Olympus 227595 STYLUS-7040 Instruction Manual (English) - Page 46
Saving battery power between shots, POWER SAVE], To operate images with the TV remote, control
View all Olympus 227595 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
STYLUS-9010/ μ-9010 STYLUS-7040/ μ-7040 STYLUS-5010/ μ-5010 HDMI micro connector HDMI micro connector HDMI micro connector HDMI cable (type D/sold separately) Connect to the HDMI connector on the TV. 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)." For details on changing the input source of the TV, refer to the TV's instruction manual. 4 Turn on the camera, and use HI to select the image for playback. Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Depending on the TV's settings, the displayed images and information may become cropped. To operate images with the TV remote control 1 Set [HDMI CONTROL] to [ON], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 45) 3 First turn on the TV, and then turn on the camera. ● Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] and operate using the camera. Saving battery power between shots [POWER SAVE] t (Settings 3) X POWER SAVE Submenu 2 OFF ON Application Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button. 46 EN