Olympus 7010 STYLUS-7010 Instruction Manual (English) - Page 56

Using an AC adapter (STYLUS-7020/μ-7020 only) An AC adapter is useful for time-consuming tasks such as image downloads to a computer or when running a slideshow for a long period of time. To use an AC adapter for this camera, the multiadapter cable (CB-MA1 or CB-MA3/separately sold) is required. Do not use any other AC adapter with this camera. Using your charger and AC adapter abroad • The charger and AC adapter can be used in most home electrical sources within the range of 100 V to 240 V AC (50/60Hz) around the world. However, AC wall outlets are shaped differently in different countries or regions. Therefore, the charger and AC adapter may require a plug adapter to match your wall outlet. For details, ask at your local electrical shop or travel agent. • Do not use travel voltage converters as they could damage your charger and AC adapter. Using an xD-Picture Card A card (and also internal memory) corresponds to the film in a film camera. The recorded images (data) can be erased, and they can be retouched with the use of a computer. Cards can be removed from the camera and exchanged, but it is not possible to remove or exchange the internal memory. Use of larger capacity cards enables you to take more pictures. Index area (Notes can be filled in here) Contact area (Contact section of the card with the internal camera terminal) Using a new card Before using a non-Olympus card or a card that was used for another purpose in a computer or other device, use [MEMORY FORMAT]/ [FORMAT] (p. 37) to format the card. Checking the image saving location The current memory indicator shows whether the internal memory or card is being used during shooting and playback. Current memory indicator IN : Internal memory is being used None: Card is being used P Current memory indicator 12M NORM Shooting mode IN 4 2009.10.26 12:30 NORM 10M 100-0004 IN 4 Playback mode Even if [MEMORY FORMAT]/[FORMAT], [ERASE], [SEL. IMAGE], or [ALL ERASE] is performed, the data in the card is not completely erased. When disposing of the card, damage the card to prevent the disclosure of personal data. Readout/recording process of the card Never open the battery/card compartment cover or unplug the USB cable while the camera is reading or writing data, which is indicated by blinking of the card access lamp. This can not only damage the image data but also render the internal memory or card unusable. Do not touch the contact area directly. Cards compatible with this camera xD-Picture Card (16MB to 2GB) (TypeH/M/M+, Standard) Card access lamp 56 EN