Olympus C-2040 Zoom Auto-Connect USB Instructions for E-10 (English) - Page 1

TWO CORPORATE CENTER DRIVE MELVILLE, NY 11747-3157 DIGITAL TECHNICAL SUPPORT CONSUMER PRODUCTS GROUP (888) 553-4448 http://support.olympusamerica. com DOCUMENT NUMBER 2739 HOW TO DOWNLOAD PICTURES USING AN OLYMPUS USB AUTO CONNECT CAMERA Introduction USB Auto Connect is a feature that allows an Olympus digital camera to emulate a disk drive when connected to a computer. This feature makes it simple to copy the pictures to your computer by using standard drag-and-drop procedures. There is no need to install drivers (except for Windows 98) since the camera is supported by the operating system. Note: The C211/3000/3030 Zoom and C-2100 Ultra Zoom are not USB Auto Connect cameras. These models use a standard USB driver. These instructions will walk you though step-by-step instructions to connect an Olympus USB camera and download pictures to your computer. For camera software installation procedures, please refer to the Software Installation Guide document included with the camera package. Installing the USB Driver for Windows 98 NOTE: A USB driver only needs to be installed if the computer is running Windows 98/98 SE. If you have a Camedia Master 4.0 CD-ROM 1) Insert the Camedia Master 4.0 disc into your CD-ROM drive. A selection menu should automatically be displayed. If the menu does not start, go to Start>Run. Type in d:\setup.exe where d: is your CD-ROM drive. 2) Choose USB Driver for Windows 98 from the selection menu. 3) Choose Continue at Install USB Driver for Windows 98. 4) Choose OK to reboot the computer. If you do not have a Camedia Master 4.0 CD-ROM 1) Download the USB Auto-Connect Driver for Windows 98 from http://www.olympusamerica.com/files/AutoConnDriv_Win98SE.exe. 2) Double-click the downloaded file to extract its contents. Type in a folder location of your choice in the Extract to text box. For example: c:\windows\temp. 3) Using Windows Explorer, open the folder you noted in step 2. Double-click on the install.exe file. 4) Choose Continue at Install USB Driver for Windows 98. 5) Choose OK to reboot the computer. Olympus America Inc. Page 1 of 9 Last updated on 11/20/02