Olympus C-3000 C-3000 Zoom Quick Start Guide (202KB) - Page 1

Olympus C-3000 - 3.2MP Digital Camera Manual

Page 1 highlights

C-3000Z QSG 00/3/29 0.3.29 17:23 Page 1 ? Having Problems with Your Olympus Camera? Visit Our Web Site at www.olympusamerica.com for Instant Online Support Taking Pictures with Your Olympus C-3000ZOOM VT1433 1AG6P1P0797-- Focus On Life Thank you for choosing the Olympus® C-3000ZOOM, the filmless digital camera that gives you the convenience of a compact point-and-shoot camera, the flexibility to take movie pictures with sound, plus a host of advanced features and image quality that only Olympus can provide. For the finest in filmless photography, look to Olympus. World Leaders in Film and Filmless Photography. To ensure you are completely satisfied with your C-3000ZOOM purchase, we've prepared this easy-to-follow users' guide. Just follow these simple instructions to set up and begin using the C-3000ZOOM. For more detailed instructions on feature use, please refer to the complete Owner's Manual included in your package. First, take a moment to familiarize yourself with the key areas of camera operation by reviewing the illustrations below. Red-Eye Flash Macro Mode Spot Meter Sequential Shooting Selftimer/ Remote Control Flash Mode Slow Shutter Flash Syncronization Compensation Battery Status Card Error Manual Focus ISO White Balance Exposure Compensation Auto Bracket Recording Mode Sound Recording Writing Number of Storable Pictures/Seconds Remaining F2.8/2.8 - f11 Olympus Zoom Lens 6.5 - 19.5 mm (35 - 105 mm equivalent) Control Panel IndWexidMeoAdnegle 3XTeIlnesppheoctotion Mo de Tele/Wide Zoom Lever Index/Playback Inspection Mode Shutter Release Button Diopter Viewfinder Erase/Flash Camera Mode Index Mark Macro/Spot Meter/Print Camera Mode Dial [M] Manual Exposure - 16 - 1/800 sec. [S] Shutter Priority - 1 - 1/800 sec. [A] Aperture Priority f2.8 - f11 [1/3 step] [P] Program Auto Exposure Display/Playback Mode Motion Picture Mode (with sound): QuickTime Movie 1/30 sec. to 1/10,000 sec. shutter speed SQ MODE - 160‫ן‬120 HQ MODE - 320‫ן‬240 (15 fps) Camera ON/OFF Mode Dial [JOG] Control Dial ᮡᮢ Arrow Top/Bottom Menu Selection Aperture/Shutter ᮤ ᮣ Arrow Left/Right: Menu Selection +/- EV [2 EV 1/3 Steps] Advance Retreat Display Extension Flash Connector Tripod Socket Battery Compartment Connectors: A/V Output (NTSC) Serial PC Connection A/C Adapter USB connection OK/Set Button [Approves Setting] Manual Focus/Lock SSFDC/SmartMedia Compartment Display ON/OFF Easy View 1.8 inch Color LCD [Easy to see in bright light from wide angles of viewing] Menu Button Get Ready... Before you begin using the C-3000ZOOM: 1. Load two CR-V3 battery packs* in the compartment at the bottom of the camera as indicated by the diagram imprinted on the camera body. For best results, Olympus America Inc. strongly recommends using two CR-V3 lithium battery packs or four "AA" nickel metal-hydride (NiMH) batteries. Four "AA" lithium or nickel cadmium (NiCd) batteries may also be used. Do not use manganese batteries. An optional Olympus AC adapter (C-7AU) is available and is recommended when downloading images to ensure a consistent power supply voltage. * Non-rechargeable 2. Insert the SmartMedia™ Memory Card. Open the door to the right of the LCD panel and slide the card into the slot. The SmartMedia card is your "film". It stores your images for reviewing, downloading, and printing. To insert, simply slide the card in-with the gold contacts facing you-until you feel the gentle click of the card holder. To eject, lightly press the card again. 3. Turn on the power. Simply turn the Power/Mode Dial located on top of the camera to , A/S/M, P or . Icons representing default settings appear on the control panel, along with the number of pictures available at the preset memory settings. The lens barrel automatically extends to its maximum length. To turn the camera off, turn the Power/Mode Dial to OFF. The LCD display goes blank and the lens barrel retracts. Get Set... Next, perform the C-3000ZOOM's initial set-up. These are the basic default settings that will affect every picture you take. Note: These settings can be changed by you at any time. 1. Turn the Power/Mode Dial to , A/S/M, P or . Then press the MENU button . The menu appears on the color LCD monitor. Note: When is selected, the menu does not appear when there are no images in the SmartMedia card. 2. Now use the Jog Dial to scroll through the menu selections to . This dial, located above the color LCD monitor, enables you to move up and down to scroll through the available menus, as well as to the left and right to make your setting selections. 3. Press the right arrow to select SETUP and press the OK button. Use the top and bottom arrows to scroll through the SETUP selections, then press the right arrow to adjust that selection. When SETUP appears next to it, press the OK button again to display the selectable items. The information to the right will guide you through the most common settings: ALL RESET ALL RESET: ON returns picture settings such as flash and focus modes to their factory set defaults. Note: This function does not reset the Setup modes. SHARPNESS: Select NORMAL for sharp, clear images without manipulation; use SOFT for capturing subjects with softer edges, or when you will apply image editing with sharpening filters to pictures downloaded to your computer; and use HARD for sharper outlines that enhance the vividness of images. TIFF SETUP: Select the image size when shooting in TIFF mode. In this mode, the number of storable pictures is reduced. SQ1 SETUP: Select the image resolution level, NORMAL or HIGH quality at 1600 x 1200 or 1280 x 960. These resolution figures represent the number of pixels used to compose an image. The higher the resolution, the larger the image dimensions and the more detail, but also the more memory each picture will consume. SQ2 SETUP: NORMAL or HIGH quality (either 1024 x 768 or 640 x 480) can be selected. BEEP SOUND: Select HIGH, LOW or OFF to hear setting confirmation sounds. FULL-TIMEAF FULL TIME AF: Autofocus is engaged automatically without having to press the Shutter release button. It can only be used when the LCD monitor is on. REC VIEW REC VIEW: When set to ON, your pictures will appear on the color LCD monitor for about 3 seconds after the picture is taken. To extend battery life, choose OFF. If you select CHECK, you will have the option to record or erase images after they have been shot. FILE NAME FILE NAME: Choose AUTO for sequential numbering of each SmartMedia card used, or RESET to have numbers reset every time a new card is inserted into your C-3000ZOOM. Note: CHECK is not available in TIFF mode. INDEX-DISPLAY MODE: With the Power/Mode Dial set to , choose the number of thumbnail images to be shown in the Index-Display mode: 4, 9 or 16. For index playback, press the Zoom lever toward W. LCD DISPLAY BRIGHTNESS: To change the brightness of the color LCD monitor, select SETUP, then move the arrow using the Jog Dial-left to decrease, right to increase. You will notice the live preview change as you make adjustments. SET DATE/TIME: Access the time and date by pressing the OK button. Adjust the time and date settings using the Jog Dial. Press the OK button again to lock in the settings. m/ft MEASUREMENT DISPLAY SETTING: Select to have distances in the manual focus mode displayed as meters (m) or feet (ft). 4. Following each selection, press the left arrow on the Jog Dial to confirm your setting, then the OK button to save it. Press the OK button again to leave the menu setup function. 5. To format a new SmartMedia™ Memory Card, simply scroll to CARD SETUP. Press the right arrow on the Jog Dial to display . Select YES, then press the OK button to format the card. Note: Formatting a card erases all existing data on the card, even locked images. These images cannot be recovered!

  • 1
  • 2

Taking Pictures with Your Olympus C-3000ZOOM
? Having Problems with
Your Olympus Camera?
Visit Our Web Site at www.olympusamerica.com for Instant Online Support
ALL RESET:
ON
returns picture settings such as flash and focus modes to their factory set defaults.
Note:
This function does not reset the Setup modes.
SHARPNESS:
Select
NORMAL
for sharp, clear images without manipulation; use
SOFT
for capturing
subjects with softer edges, or when you will apply image editing with sharpening filters to
pictures downloaded to your computer; and use
HARD
for sharper outlines that enhance
the vividness of images.
TIFF SETUP:
Select the image size when shooting in
TIFF
mode.
In this mode, the number of storable
pictures is reduced.
SQ1 SETUP:
Select the image resolution level,
NORMAL
or
HIGH
quality at 1600 x 1200 or 1280 x
960.
These resolution figures represent the number of pixels used to compose an image.
The higher the resolution, the larger the image dimensions and the more detail, but also
the more memory each picture will consume.
SQ2 SETUP:
NORMAL
or
HIGH
quality (either 1024 x 768 or 640 x 480) can be selected.
BEEP SOUND:
Select
HIGH
,
LOW
or
OFF
to hear setting confirmation sounds.
FULL TIME AF:
Autofocus is engaged automatically without having to press the Shutter release button.
It can only be used when the LCD monitor is on.
REC VIEW:
When set to
ON
, your pictures will appear on the color LCD monitor for about 3 seconds
after the picture is taken.
To extend battery life, choose
OFF
.
If you select
CHECK
, you
will have the option to record or erase images after they have been shot.
FILE NAME:
Choose
AUTO
for sequential numbering of each SmartMedia card used, or
RESET
to
have numbers reset every time a new card is inserted into your C-3000ZOOM.
Note: CHECK
is not available in
TIFF
mode.
INDEX-DISPLAY MODE:
With the Power/Mode Dial set to
, choose the number of thumbnail images to be shown
in the Index-Display mode:
4
,
9
or
16
.
For index playback, press the Zoom lever toward W.
LCD DISPLAY BRIGHTNESS:
To change the brightness of the color LCD monitor, select
SETUP
, then move the arrow
using the Jog Dial—left to decrease, right to increase.
You will notice the live preview
change as you make adjustments.
SET DATE/TIME:
Access the time and date by pressing the
OK
button.
Adjust the time and date settings
using the Jog Dial.
Press the
OK
button again to lock in the settings.
MEASUREMENT DISPLAY SETTING:
Select to have distances in the manual focus mode displayed as meters (m) or feet (ft).
4. Following each selection, press the left arrow on the Jog Dial to confirm your setting,
then the OK button to save it.
Press the
OK
button again to leave the menu setup function.
5.To format a new SmartMedia™ Memory Card, simply scroll to CARD SETUP.
Press the
right arrow on the Jog Dial to display
.
Select
YES
, then press the
OK
button to format
the card.
Note:
Formatting a card erases
all
existing data on the card, even locked images. These
images cannot be recovered!
m/ft
FILE
NAME
REC
VIEW
FULL-TIME AF
ALL
RESET
Thank you for choosing the Olympus
®
C-3000ZOOM, the filmless digital camera
that gives you the convenience of a compact point-and-shoot camera, the
flexibility to take movie pictures with sound, plus a host of advanced features
and image quality that only Olympus can provide.
For the finest in filmless
photography, look to Olympus.
World Leaders in Film and Filmless Photography.
To ensure you are completely satisfied with your C-3000ZOOM purchase, we’ve
prepared this easy-to-follow users’ guide.
Just follow these simple instructions
to set up and begin using the C-3000ZOOM.
For more detailed instructions on
feature use, please refer to the complete Owner’s Manual included in your
package.
First, take a moment to familiarize yourself with the key areas of camera
operation by reviewing the illustrations below.
Get Ready...
Before you begin using the C-3000ZOOM:
1. Load two CR-V3 battery packs* in the compartment at the bottom of the camera as
indicated by the diagram imprinted on the camera body.
For best results, Olympus America Inc. strongly recommends using two CR-V3 lithium
battery packs or four “AA” nickel metal-hydride (NiMH) batteries.
Four “AA” lithium or nickel
cadmium (NiCd) batteries may also be used.
Do not use manganese batteries.
An optional
Olympus AC adapter (C-7AU) is available and is recommended when downloading images to
ensure a consistent power supply voltage.
* Non-rechargeable
2. Insert the SmartMedia™ Memory Card.
Open the door to the right of the LCD panel
and slide the card into the slot.
The SmartMedia card is your “film”.
It stores your images
for reviewing, downloading, and printing.
To insert, simply slide the card in—with the gold
contacts facing you—until you feel the gentle click of the card holder.
To eject, lightly press
the card again.
3. Turn on the power.
Simply turn the Power/Mode Dial located on top of the camera to
,
A/S/M
,
P
or
.
Icons representing default settings appear on the control panel,
along with the number of pictures available at the preset memory settings.
The lens barrel
automatically extends to its maximum length.
To turn the camera off, turn the Power/Mode Dial to
OFF
.
The LCD display goes blank and
the lens barrel retracts.
Get Set...
Next, perform the C-3000ZOOM’s initial set-up.
These are the basic default settings that will
affect every picture you take.
Note:
These settings can be changed by you at any time.
1. Turn the Power/Mode Dial to
, A/S/M, P or
.
Then press the MENU button
.
The menu appears on the color LCD monitor.
Note:
When
is selected, the menu does not appear when there are no images in the
SmartMedia card.
2. Now use the Jog Dial to scroll through the menu selections to
.
This dial, located
above the color LCD monitor, enables you to move up and down to scroll through the
available menus, as well as to the left and right to make your setting selections.
3. Press the right arrow to select SETUP and press the OK button.
Use the top and bottom
arrows to scroll through the
SETUP
selections, then press the right arrow to adjust that
selection.
When
SETUP
appears next to it, press the
OK
button again to display the
selectable items.
The information to the right will guide you through the most common
settings:
I
n
d
e
x
M
o
d
e
W
i
d
e
A
n
g
l
e
e
d
o
M
n
o
i
t
c
e
p
s
n
I
X
3
o
t
o
h
p
e
l
e
T
Manual Focus
ISO
White Balance
Auto Bracket
Number of Storable
Pictures/Seconds
Remaining
Card Error
Red-Eye Flash
Macro Mode
Spot Meter
Sequential Shooting
Selftimer/
Remote Control
Recording Mode
Writing
Sound Recording
Flash Mode
Slow Shutter
Syncronization
Flash
Compensation
Battery Status
Exposure
Compensation
F2.8/2.8 – f11 Olympus Zoom Lens
6.5 – 19.5 mm (35 – 105 mm equivalent)
Control Panel
Erase/Flash
Camera Mode Index Mark
Macro/Spot Meter/Print
Diopter
Viewfinder
Connectors:
A/V Output (NTSC)
Serial PC Connection
A/C Adapter
USB connection
Tripod Socket
Extension Flash Connector
Battery Compartment
Tele/Wide Zoom Lever
Index/Playback Inspection Mode
Shutter Release Button
Camera Mode Dial
[M]
Manual Exposure – 16 – 1/800 sec.
[S]
Shutter Priority – 1 – 1/800 sec.
[A]
Aperture Priority f2.8 – f11 [1/3 step]
[P]
Program Auto Exposure
Display/Playback Mode
Motion Picture Mode (with sound):
QuickTime Movie
1/30 sec. to 1/10,000 sec. shutter speed
SQ MODE — 160
2
120
HQ MODE — 320
2
240
(15 fps)
Camera ON/OFF Mode Dial
SSFDC/SmartMedia Compartment
Display ON/OFF
Menu Button
Easy View 1.8 inch Color LCD
[Easy to see in bright light from
wide angles of viewing]
OK/Set Button [Approves Setting]
Manual Focus/Lock
[JOG] Control Dial
¶˜
Arrow Top/Bottom
Menu Selection
Aperture/Shutter
§'
Arrow Left/Right:
Menu Selection
+/- EV [2 EV 1/3 Steps]
Advance Retreat Display
Focus On Life
VT1433
1AG6P1P0797--
C-3000Z QSG 00/3/29
0.3.29 17:23
Page 1