Olympus C-770 Reference Manual - Page 98
Select the exposure differential., Press, Select the number of shots. Press, to select ×3 or ×5
UPC - 050332146327
View all Olympus C-770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
2 Select the exposure differential. Press ac to select ±0.3, ±0.7 or ±1.0, then press d. Sequential shooting BKt CANCEL SELECt GO 3 Select the number of shots. Press ac to select ×3 or ×5, then press e. • Press e repeatedly until the menu disappears. 4 Take the picture. • Press the shutter button fully and keep it pressed to shoot the preset number of pictures. You can stop shooting at any time by releasing the shutter button. • Sequential shooting (j, i, k, 7) is not possible in 5 the following situations: Note - When the record mode is set to TIFF or ENLARGE SIZE in Advanced shooting SHQ mode. - When NOISE REDUCTION is set to ON. • Auto bracketing is not possible in M mode. • The built-in flash and external flash do not fire in 7 mode. • In modes other than S and M, since the shutter speed is set to max. 1/30 sec., exposure is decreased when shooting a dark subject. • In BKT mode other than S mode, if the shutter speed is set to longer than 1/30 sec. when the exposure differential is 0, the shutter speed is fixed at 1/30 sec. and the picture is taken in 7 mode. • If the battery power is low and the battery check blinks during sequential shooting, shooting stops and the camera starts saving the pictures you have taken. Whether or not all of the shots are saved depends on how much battery power remains. • If there is not enough space available on the card for the number of frames you have set during auto bracketing, you cannot continue shooting. 97