Olympus D630 D-630 Zoom Advanced Manual (English) - Page 45

Make sure that the edges of the pictures overlap, then take, the pictures., Press

Page 45 highlights

Panorama shooting 2 Make sure that the edges of the pictures overlap, then take the pictures. The part of the previous picture where it will be joined to the next picture does not remain in the frame on the edge of the screen. You have to remember what the part in the frame looked like and take the next picture so it overlaps. • The focus, exposure, and white balance are set by the first picture. Do not select an extremely bright subject (such as the sun) for the first picture. • You cannot adjust the zoom after the first picture. 4 • Panorama shooting is possible for up to 10 pictures. • When you have taken 10 pictures, a warning mark g is displayed. 3 Press Z to exit panorama shooting. Note • Panorama mode can only be used when there is a card in the camera. Moreover, panorama mode is only available with Olympus cards. • During panorama shooting, the flash is not available. • The camera itself cannot connect panorama pictures. The OLYMPUS Master software is necessary to connect the pictures. Additional shooting functions 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134

Panorama shooting
45
4
Additional shooting functions
2
Make sure that the edges of the pictures overlap, then take
the pictures.
The focus, exposure, and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
You cannot adjust the zoom after the first picture.
Panorama shooting is possible for up to 10 pictures.
When you have taken 10 pictures, a warning
mark
g
is displayed.
3
Press
Z
to exit panorama shooting.
The part of the previous picture where it will be joined to the next picture does not
remain in the frame on the edge of the screen. You have to remember what the
part in the frame looked like and take the next picture so it overlaps.
Note
Panorama mode can only be used when there is a card in the camera.
Moreover, panorama mode is only available with Olympus cards.
During panorama shooting, the flash is not available.
The camera itself cannot connect panorama pictures. The OLYMPUS Master
software is necessary to connect the pictures.