Olympus DP-201 DP-201 Instructions (English) - Page 2
Erase - recorder
View all Olympus DP-201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Erase Select the file you want to delete and stop playback beforehand. To delete all files recorded on a specific date, press the SEARCH/MENU button to switch to the date display. File Erase Erase in Date File Erase Cancel If [Cancel] is selected and the PLAY/OK (.) button is pressed, the recorder returns to the stop mode. Erase in Date ``` ``` ``` Select Set ``` The number of files to be deleted flashes. The date of all the files to be deleted flashes. ` ` An erased file cannot be restored. Take care when deleting files. After deletion, files are renumbered consecutively, and the recorder stops at the beginning of the next file. After deletion, the next date with recorded files available is displayed. • If no operations are performed for 8 seconds, the recorder returns to the stop mode. • It may take for more than 10 seconds to complete the processing. Do not remove batteries while processing. The data may be corrupted. Check the battery level beforehand to ensure that that the batteries do not run out while processing. 1 Press SEARCH/ MENU for more than 1 second. 2 Press 0 or 9 to highlight the item you want to set. Time & Date Beep Setting time and date ``` ``` ``` Rec Mode Language 3 Confirm the selection. File management will be easier by setting the time and date. ``` Changing the recording mode Turning the beep On/Off Press 0 or 9 to set a date. s The clock will start from the set date and time. Press the PLAY/OK (.) button according to the time signal. s Check the time and date settings before using the product again if it is left unused for long periods of time. Changing the display language ``` ``` ``` Use the 0 and 9 buttons to switch recording modes. Recommended settings by recording condition Recording condition Dictation with a lot of background noise. Recordings for lessons and meetings. Lengthy recordings. Recommended settings Rec Mode MIC SENSE [HQ] (high quality sound recording) [HQ] (high quality sound recording) [SP] (standard recording) [LOW] [HIGH] [HIGH] Use the 0 and 9 buttons to turn the operating sound On/Off. Use the 0 and 9 buttons to select the display language. Safe and proper usage General precautions • Do not leave the recorder in hot, humid locations such as inside a closed automobile under direct sunlight or on the beach in the summer. • Do not store the recorder in places exposed to excessive moisture or dust. • Do not use organic solvents such as alcohol and lacquer thinner to clean the unit. • Do not place the recorder on top of or near electric appliances such as TVs or refrigerators. • Avoid recording or playing back near cellular phones or other wireless equipment, as they may cause interference and noise. If you experience noise, move to another place, or move the recorder further away from such equipment. • Avoid sand or dirt. These can cause irreparable damage. • Avoid strong vibrations or shocks. • Do not disassemble, repair or modify the unit yourself. • Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart). • Keep the unit out of the reach of children. • Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction, or during repair work. • For important recorded content, we recommend you to write it down some where. • Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reasons is excluded from Olympus's liability. Batteries f Danger: • Batteries should never be exposed to flame, heat, short-circuited or disassembled. • Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot vehicle, near a heat source, etc. f Warning: • Do not solder lead wires or terminals directly onto a battery or modify it. • Do not connect the = and - terminals together. This may cause fire, overheating or electric shock. • When carrying or storing the batteries, be sure to put them in the provided case to protect their terminals. Do not carry or store the batteries with any metal objects (such as key rings). If this warning is not followed, fire, overheating or electric shock may occur. • Do not insert the batteries with their = and - terminals reversed. • If any liquid from a battery gets into your eyes, promptly wash it off with clean water and consult your doctor at once. • Do not attempt to recharge alkaline, lithium or any other nonrechargeable batteries. • Never use any batteries with a torn or cracked outer cover. • Keep batteries out of the reach of children. • If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor: 1 remove the batteries immediately while being careful not to burn yourself, and; 2 call your dealer or local Olympus representative for service. • Do not expose the batteries to water. Do not allow water to contact the terminals. • Do not remove or damage the batteries insulating sheet. • Do not use the batteries if you find something wrong with them such as leakage, color change or deformity. • Unplug the charger if the charging is still incomplete after the specified time it should take. • Should any batteries liquid get on skin or clothing, promptly wash it off with clean water. • Keep batteries away from fire. f Caution: • Do not subject batteries to strong shocks. • When using rechargeable batteries that have not been used for a while, be sure to recharge them before use. • Rechargeable batteries have a limited lifetime. When the operating time becomes shorter even if the rechargeable battery is fully charged under the specified condition, replace it with a new one. Troubleshooting Q1: The power cannot be turned on. A1: • Batteries are exhausted. • Batteries are inserted incorrectly. Check = and - before inserting new batteries. • Terminals are soiled. Clean them with a dry cloth. Q2: Nothing happens when a button is pressed. A2: • The POWER switch is set to [OFF/HOLD] position. Slide the POWER switch to the [ON] position. Q3: No sound or quiet sound is heard from the speaker while playing back. A3: The earphone plug is plugged into the recorder. The volume is set to the low level. Q4: Recording is not possible. A4: By pressing the REC (-) button: • Check if the display shows [Memory Full]. • Check if the display shows [Maximum File Size is reached]. Delete unnecessary files before recording. A maximum of 99 files can be recorded in a day. Q5: The playback speed is too fast (slow). A5: The recorder is set to fast (slow) Playback. Use the PLAY SPEED button to set to normal playback. Specifications Recording medium: Built-in flash memory (2GB) Overall frequency: HQ mode: 70 to 7,900 Hz SP mode: 70 to 4,700 Hz Guide to recording times: HQ mode: Approx. 98 h. SP mode: Approx. 202 h. Microphone: Electret Condenser Microphone (monaural) Speaker: Built-in ø 36 mm round dynamic speaker Maximum power: 180 mW Earphone jack (monaural): ø 3.5 mm diameter, impedance 8 Ω or more Power supply: Two AAA (LR03) batteries Continuous battery: Guide to alkaline battery life Recording mode During recording mode During playback mode (Built-in speakers) During playback mode (Earphone) HQ approx. 67 h. approx. 21 h. SP approx. 80 h. approx. 21 h. approx. 45 h. approx. 49 h. Dimensions: 95 (L) mm x 50 (W) mm x 18.2 (T) mm (without protrusions) Weight: 78 g (including battery) Operating temperature: 0°C - 42°C • Battery life is measured by Olympus. It varies greatly according to the type of batteries used and the conditions of use. • Your recorded contents are for your personal use or pleasure only. It is prohibited to record copyrighted material without permission of the copyright holders according to copyright law. • Specifications and design are subject to change without notice for improvement of performance.