Olympus E-1 E-1 Basic Manual (English, Français, Deutsch, Espa&#2 - Page 43

Specifications Ⅵ Exposure control Metering system : TTL full-aperture metering system En (1) Digital ESP metering (2) Center weighted average metering (3) Spot metering (approx. 2% for the viewfinder screen) Metering range : (1) EV 1 - 20 (Digital ESP metering, Center weighted average metering) (2) EV 3 - 17 (Spot metering) (At normal temperature, 50 mm F2, ISO 100) Exposure mode : (1) P: Program AE (Program shift can be performed) (2) A: Aperture priority AE (3) S: Shutter priority AE (4) M: Manual ISO sensitivity : 100 - 800 (High ISO values (1600 and 3200) are available) Exposure compensation : Exposure can be adjusted in 1/3, 1/2 or 1 EV step within a range of ± 5 EV. Ⅵ White balance Product type Mode setting : CCD and white balance sensor : Auto, Preset WB (12 settings), One-touch WB (4 settings can be registered) Ⅵ Recording Memory Recording format Recording mode : CF card (Compatible with Type I and II) Microdrive compatible (Compatible with FAT 32) : DCF, DPOF compatible/Exif 2.2 compatible, PRINT Image Matching II compatible : RAW (12 bits), TIFF (RGB), JPEG Ⅵ Playback Playback mode Information display : Single-frame playback, Close-up playback, Index display, Picture rotation : Information display, Histogram display, Highlight display Ⅵ Drive Drive mode : Single-frame shooting, Sequential shooting, Self-timer, Remote control Sequential shooting : 3 frames/sec. (Max. no. of storable sequential pictures: 12 frames) *Applied to all record modes. Self-timer : Operation time: 12 sec., 2 sec. Optical remote control : Operation time: 2 sec., 0 sec. (instantaneous shooting) Ⅵ Flash Synchronization Flash control mode Flash attachment : Synchronized with the camera at 1/180 sec. or less : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL : Hot shoe, External flash connector (x attachment) 43