Olympus FE 250 FE-250 Instruction Manual (English) - Page 20

DRIVE Using sequential (continuous) shooting o Shoots 1 frame at a time when the shutter button is pressed. i Focus and exposure are locked at the first frame. The sequential shooting speed varies depending on the setting of image quality. You can take a sequence of pictures at one time by holding down the shutter button. The camera will continue taking high speed sequential shooting until you release the shutter button. • In [i], the flash mode is fixed at [$] and [IMAGE QUALITY] is limited to [2048 × 1536]. R (still picture Recording sound when taking still pictures OFF /ON When activated [ON], the camera will record about 4 seconds of audio after the picture is taken. When recording, aim the camera microphone at the source of the sound you want to record. R (movie Recording movies with or without sound OFF/ ON When [ON] (Recording with sound) is selected, the optical zoom cannot be used during movie recording. Only the digital zoom can be activated. PANORAMA Creating a panoramic picture Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software on the provided CD-ROM. An Olympus xD-Picture Card is required for panorama shooting. Menu operations Connects pictures from left to right Y: The next picture is connected at the right edge. X: The next picture is connected at the left edge. Connects pictures from bottom to top O: The next picture is connected at the top edge. N: The next picture is connected at the bottom edge. Use the arrow pad to specify at which edge you want to connect the pictures; and then compose your shots so that the edges of the pictures overlap. The part of the previous picture where it will be joined to the next picture does not remain in the frame. You have to remember what the part in the frame looked like and take the next picture so it overlaps. 20 EN