Olympus FE-4030 FE-4030 Instruction Manual (English) - Page 14
Shooting, Viewing, and Erasing
![]() |
UPC - 050332172692
View all Olympus FE-4030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Shooting, Viewing, and Erasing Shooting with the optimum aperture value and shutter speed [PROGRAM AUTO] In this mode, automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, etc. as needed. 1 Press the n button to turn on the camera. [PROGRAM AUTO] indicator 2 Hold the camera and compose the shot. Monitor Horizontal grip P 0.0 WB AUTO ISO AUTO 14M 4 Number of storable still pictures (p. 49) Monitor (standby mode screen) If the [PROGRAM AUTO] indicator is not displayed, press the m button to display the function menu and then set the shooting mode to P. "Using the Menu" (p. 4) Current shooting mode display PROGRAM AUTO P Vertical grip When holding the camera, take care not to cover the flash with your fingers, etc. 3 Press the shutter button halfway down to focus on the subject. ● When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. ● The camera was unable to focus if the AF target mark flashes red. Try focusing again. AF target mark P 0.0 WB AUTO ISO AUTO 14M 4 Press the n button again to turn off the camera. Press halfway 1/400 F2.6 Shutter speed Aperture value "Focusing" (p. 44) 14 EN
![](/manual_guide/products/olympus-fe4030-fe4030-instruction-manual-english-b1ab04e/14.png)