Olympus FE-46 FE-46 Instruction Manual (English) - Page 30

Menus for Other Camera Settings Erasing data completely [MEMORY FORMAT]/[FORMAT] E SETUP X MEMORY FORMAT/FORMAT Before formatting, check that no important data is left in the internal memory or card. Non-Olympus cards and cards that have been formatted by a computer must be formatted with this camera before use. Submenu 2 YES NO Application Completely erases the image data in the internal memory*1 or card (including protected images). Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory to the card [BACKUP] E SETUP X BACKUP Submenu 2 YES NO Application Backs up image data in the internal memory to the card. Cancels the backup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup. Changing the display language [W] E SETUP X W "Changing the display language" (p. 13) Submenu 2 Languages*1 Application The language for the menus and error messages displayed on the monitor is selected. *1 The available languages vary depending on the country and/or region where the camera was purchased. Adjusting the CCD and the image processing function [PIXEL MAPPING] E SETUP X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the B button when [START] (Submenu 2) is displayed. ● The camera checks and adjusts the CCD and the image processing function at the same time. 30 EN