Olympus PT-E06 PT-E06 Underwater Housing for the E-620 DSLR Instruction Manual - Page 12
How to connect the electronic flash
UPC - 050332168954
View all Olympus PT-E06 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. How to connect the electronic flash Connecting the underwater optical fiber cable To connect the UFL-2 underwater flash (optional) to the Case using an underwater optical fiber cable (optional), follow the procedures below. How to connect the underwater optical fiber cable 1 Remove the cap of the optical fiber cable insertion slot. En 2 Put the underwater optical fiber cable plug all the way into the optical fiber cable insertion slot. Setting of the digital camera 1 Set the RC mode of the camera to ON so that the camera's built-in flash is activated. 2 Load the camera in the Case with the camera's built-in flash popped up. Refer to the UFL-2 instruction manual for the UFL-2 operation. CAUTION: When using a non-Olympus manufacturer's slave-type flash with underwater optical fiber cable, set the camera's built-in flash to manual. If the camera's built-in flash ratio is more than 1/64, the camera's built-in flash light may reflect in the lens port and be taken into the picture. EN 11