Olympus Stylus 1040 Stylus 1040 Instruction Manual (English) - Page 35

Make the settings for the functions while referring to "Using the Menu" (p. 3). Adjusting the brightness of the monitor [s] S SETUP X s To adjust the monitor brightness 1 Use CE to adjust the brightness while viewing the screen, and then press the x button. s Setting the date and time [X] S SETUP X X "Setting the date and time" (p. 13) To select the date and time display order 1 Press D after setting Minute, and use CE to select the date display order. X BACK MENU SET OK Date order Y M D TIME 2008 10 26 12 30 Y M D CANCEL MENU Selecting the video signal system to match your TV [VIDEO OUT] S SETUP X VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV's video signal type. Submenu 2 NTSC PAL Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on Connecting the camera to a TV in European countries, China, and so on The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Connect the TV and camera. Connector cover Open the connector cover in the direction of the arrow. Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) 2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/ [PAL]). 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)." For details on changing the input source of the TV, refer to the TV's instruction manual. 4 Press the q button, and use CEFD to select the image for playback. Depending on the TV's settings, the displayed images and information may become cropped. EN 35