Olympus Stylus 1040 Stylus 1040 Instruction Manual (English) - Page 42

Using OLYMPUS Master 2 System requirements and installation of OLYMPUS Master 2 Install the OLYMPUS Master 2 software by referring to the included installation guide. Connecting the camera to a computer 1 Make sure the camera is turned off. ● The monitor is off. ● The lens barrier is closed. 2 Connect the camera to a computer. ● The camera automatically turns on. USB PC EASY PRINT CUSTOM PRINT EXIT SET OK Connector cover Open the connector cover in the direction of the arrow. Multi-connector USB cable (supplied) 3 Use CE to select [PC], and press the x button. ● The computer automatically detects the camera as a new device on the first connection. Windows After the computer detects the camera, a message indicating the completion of the setting appears. Confirm the message and click "OK". The camera is recognized as a removable disk. Macintosh When iPhoto started, exit iPhoto and start OLYMPUS Master 2. While the camera is connected to the computer, shooting functions are disabled. Connecting the camera to a computer via a USB hub may cause unstable operation. When [MTP] is set for the submenu that appears by pressing D after selecting [PC] in Step 3, images cannot be transferred to a computer using OLYMPUS Master 2. Starting OLYMPUS Master 2 1 Double-click the OLYMPUS Master 2 icon . Windows appears on the desktop. Macintosh appears in the OLYMPUS Master 2 folder. ● Browse window appears after starting the software. When you start OLYMPUS Master 2 for the first time after installation, "Default Settings" and "Registration" screens appear. Follow the instructions on the screen. Locate the position of the USB port by referring to your computer's instructions manual. 42 EN