Olympus VN-7100 VN-7200 Instructions (English) - Page 6

Cancel the segment repeat playback function: To cancel the segment repeat playback, press either STOP (4), REC (s), 9, or the 0 button. " • If you press and hold 0 and rewind past the start position, or press and hold 9 and fast forward past the end position, the segment repeat playback will be canceled. Erasing 1 Select the file you want to erase. 2 While the recorder is during stop mode, press the ERASE button. • File number and [NO] will flash on the display. 3 Press the 0 button to select [yES]. 4 Press the `OK button. • Erasing begins and [ERASE] flashes on the display. Erasing all files in a folder: 1 Select the folder you want to erase. 2 While the recorder is during stop mode, press the ERASE button. 3 Press the ERASE button again. • [ALL] and [NO] will flash on the display. 4 Press the 0 button to select [yES]. 5 Press the `OK button. • Erasing begins and [ERASE] flashes on the display. " • Locked files cannot be erased. • If an action is not selected within 8 seconds, the recorder will return to stop mode. • It may take over 10 seconds to complete processing. Never remove batteries during this time because data may be corrupted. In addition, carefully check the remaining battery level in order to ensure that the battery will not run out while processing. • You cannot delete folders with this recorder. Setting an index mark 1 While the recorder is during recording mode or playback mode, press the FOLDER/INDEX button. Index number • Even after an index mark is placed, recording or playback will continue so you can place index marks in other locations in a similar manner. Clearing an index mark: While the index number appears for approximately 2 seconds on the display, press the ERASE button. • Erasing an index mark will make the index number after it move up automatically. " • Up to 16 index marks can be set in a file. If you try to place more than 16 index marks, the [FULL] message will be displayed. • Index marks cannot be set or erased in a locked file. LCD display information While the recorder is during stop mode, pressing and holding the STOP (4) button will make the display switch information in the following order: • Current date ➔ Current time ➔ Remaining recording time ➔ Current date ... While the recorder is during recording mode, pressing the DISP/MENU button will make the display switch information in the following order: • Elapsed recording time ➔ Remaining recording time ➔ Elapsed recording time ... While the recorder is during stop mode or playback mode, pressing the DISP/MENU button will make the display switch information in the following order: • Count up ➔ Count down ➔ Recording date ➔ Recording time ➔ Count up ... Menu setting method You can set each menu item as follows. 1 While the recorder is during stop mode, press and hold the DISP/MENU button. 2 Press the + or − button to move to the item you want to set. 3 Press the 9 or 0 button to change the setting. 4 Press the `OK or +/− button to set. 5 Press the STOP (4) button to close the menu screen. • The setting menu icons on the display will turn on. 1 2 3 4 5 6 7 8 9 1 File lock 2 Recording mode 3 Microphone sensitivity 4 VCVA 5 Timer recording 6 Noise cancel 7 Continuous playback 8 Alarm playback 9 Repeat playback " • The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied. Recording mode [MODE] [HQ]: High quality sound recording. [SP]: Standard recording. [LP]: Long-term recording. " • To record a meeting or a lecture clearly, set other than [LP].  EN