Omron BP742 Instruction Manual - Page 20

USING THE MEMORY FUNCTION NOTES: • The measurement value number is displayed briefly in the Pulse Display area when you press the Up/Down buttons ( ). • The date and time are alternately displayed with the measurement values. • If the date and time are not set, "-:--" is displayed with the measurement values. • Press the button repeatedly to display the next values. • Press and hold the button to display the values faster. Alternating display TO DELETE ALL VALUES STORED IN THE MEMORY The values stored in the memory are deleted by USER ID. You cannot partially delete values stored in the memory. All values for the user you select will be deleted. 1. Press the START/STOP button to turn the monitor on. 2. Select your USER ID (A or B). 3. While holding the Down button ( ), press the START/STOP button down for more than five seconds until the display appears as it does in the following illustration. 4. Press the START/STOP button to turn the monitor off. NOTE: The monitor will automatically turn off after five minutes. 20