Onkyo C-705TX User Manual English - Page 11

Connections Audio connection cable ANALOG OUTPUT L R REMOTE CONTROL DIGITAL OUTPUT OPTICAL 1 2 AC OUTLET AC 230-240V UNSWITCHED 100W MAX. 50Hz "CLASS 1 LASER PRODUCT" To wall outlet Before Using Connections Operations 1 cable LR CD connector Amplifier without digital input terminal 3 2 DIGITAL IN MD recorder, CD recorder, DAT deck, etc. Optional Optical fiber cable 1 Connection with the Amplifier Connect the ANALOG OUTPUT connectors on the rear panel of C-705TX and the amplifier's CD input connectors using the audio connection cable. Refer to the amplifier's instruction manual for connections. 2 Connection to DIGITAL OUTPUT connector Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD, CD-R, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1 or 2 connector using the optical cable (option). These connectors can also be used for connecting an amplifier which is equipped with a digital input connector. A connector protection cap is attached to the digital output connector. Re- move this cap to connect the unit to other digital equipment. When you are not using the digital output connector, replace this cap. 3 AC OUTLET (UNSWITCHED) The AC power cord of another compo- nent can be connected to this AC OUT- ANALOG OUTPUT LET connector. L R This means that if the C-705TX is plugged into an AC outlet, AC power is available REMOTE CONTROL DIGITAL OUTPUT OPTICAL 1 2 AC OUTLET AC 230-240V UNSWITCHED 100W MAX. 50Hz "CLASS 1 LASER PRODUCT" to this AC OUTLET even if the C-705TX is off. The shape and capacity of the AC outlet 230-240 V, 50 Hz models 120 V, 60 Hz models may differ depending on the area of purchase. Make sure that the capacity of other components connected to this unit does Capacity is 100 watts. Capacity is 120 watts. not exceed the capacity that is printed on the rear panel. 11 Other Information