Onkyo C-705TX User Manual English - Page 12

Connecting to the other components Connecting the connector Connecting the power cord If you are using other ONKYO components equipped with connectors, you can control these components using the amplifier's remote controller. Before connecting • The amplifier must be connected in the system hookups for control operations. • Each component has two connectors. There is no difference between those connectors. • The components may be connected in any order. • Remote control operation is not possible if only the remote control cable is connected to the connectors. Connect the audio connection cables correctly. The illustration below is the hookup example. With these hookups, you can operate the CD Synchro Recording (see "CD/MD synchro recording" on page 8). Tuner Amplifier cable Cassette Tape Deck cable Insert the AC power cord into a wall outlet. The STANDBY indicator lights. To wall outlet STANDBY/ ON STANDBY Light • To use the unit with the other Onkyo Separate Collection series components, follow the connection diagram in the A-905TX/R-805TX instruction manual to connect the unit to the system. • If you press the (OPEN/CLOSE) button while the unit is in the STANDBY mode, the power will turn on and the display will light up automatically. C-705TX REMOTE CONTROL Supplied cable Note An remote control cable equipped with a 1/ 8 in. (3.5mm) diameter miniature two-conductor phone plug is included with this unit and with every tuner and cassette deck that bears the mark. 12