Onkyo DV-BD606 Owner Manual - Page 8

FUNCTIONAL OVERVIEW Front Panel 12 3 4* 5 6 7 8* 9 10 ON / STANDBY SD CARD BLU-RAY DISC PLAYER DV-BD606 * The unit can also be turned on by pressing these buttons. 1. STANDBY indicator • This indicator lights up in red in standby mode and turns off when the power is on. 2. yON / STANDBY button • Press to turn the unit on or off. 3. Disc tray • Place a disc when opening the disc tray. 4. A (open / close) button* • Press to open or close the disc tray. 5. Display • Refer to "Front Panel Display" on page 11. 6. k (pause) button • Press to pause playback. 7. C (stop) button • Press to stop playback. 8. B (play) button* • Press to start or resume playback. 9. Infrared sensor window • Receive signals from your remote control so that you can control the unit from a distance. 10. SD CARD slot • Insert an SD Memory Card, and play back the contents in it. Rear Panel 1 2 3 4 5 VIDEO OUTPUT COMPONENT Y PR VIDEO PB OUT HDMI 6 AUDIO OUTPUT ANALOG DIGITAL L (PCM//BITSTREAM) COAXIAL OPTICAL R AC INLET 1. VIDEO OUTPUT (COMPONENT) jacks • Use to connect a TV with component video inputs with an RCA component video cable. 2. HDMI OUT jack • Use to connect a TV with an HDMI compatible port with an HDMI cable. 3. AUDIO OUTPUT (ANALOG L / R) jacks • Use to connect a TV, an AV receiver / amplifier or other device with an RCA audio cable. 4. AUDIO OUTPUT (DIGITAL COAXIAL / OPTICAL) jacks • Use to connect an AV receiver / amplifier, Dolby Digital / DTS decoder or other device with a digital audio coaxial / optical input jack with a digital audio coaxial / optical cable. 5. AC INLET Terminal • Use to connect the AC outlet with the AC cord. 6. VIDEO OUTPUT (VIDEO) jack • Use to connect a TV, an AV receiver or other device with an RCA video cable. Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator. 8 EN