Onkyo DV-CP701 Owner Manual - Page 21

Basic Playback DISC DISC SKIP SELECT PLAY/ENTER OPEN/ CLOSE ON STANDBY OPEN/ CLOSE SEARCH LAST M MEMORY CHAIN MODE 1 2 4 5 7 8 +10 0 TOP MENU REPEAT 3 A-B 6 RANDOM 9 DISPLAY CLEAR MENU RETURN ENTER SETUP AUDIO ANGLE SUBTITLE DISC1-6 DISC SKIP DISC 1 DISC 2 DISC 3 STEP/SLOW DISC 4 DISC 5 DISC 6 DISC SKIP PROGRESSIVE DIMMER RC-521DV Loading & Removing Discs DVD VCD CD MP3 WMA JPEG This section explains how to load and remove discs. 1 Remote controller OPEN/ CLOSE Press the OPEN/CLOSE [ ] button. The disc tray opens and the six disc number indicators appear on the display. A circle appears around the number of the disc bay on the right. 2 Place a disc, label side up, into each bay. 3 Remote controller DISC SKIP Press the [DISC SKIP] button to access the other disc bays. The disc tray turns counterclockwise two bays at a time. 4 Remote controller OPEN/ CLOSE When you've finished, press the OPEN/CLOSE [ ] button again. The disc tray closes. See page 22 for information on selecting and playing discs. Tip: If you press the Play [ ] button, the disc tray will close and playback of the disc in the right bay will start automatically. If there is no disc in that bay, the DV-CP701 will check the other bays and play the first disc it finds. Tip: If you press one of the DISC SELECT 1-6 buttons, the disc tray will close and playback of the selected disc will start automatically. Notes: • You can load up to six discs. You don't have to load all six discs every time. • When the disc tray is closed, all of the disc indicators appear until the DV-CP701 has checked each bay for the presence of a disc. If a bay is found to have no disc, the corresponding indicator disappears. • The disc tray can be opened and closed even while the DVCP701 is in Standby mode, so you don't have to turn it on to load or remove your discs. (The disc tray may take several seconds to open.) • The DV-CP701 supports 8 cm and 12 cm discs. To avoid damaging your discs or DV-CP701, always place discs in the center of the disc bays. • Only load discs that are supported by the DV-CP701 (see page 7). Don't load cartridge-type discs. • To avoid personal injury, keep your hands away from the disc tray as it closes. • Always use the OPEN/CLOSE [ ] button to open and close the disc tray. Never push the disc tray, and don't touch it, or obstruct it while it's opening or closing. Don't press down on the disc tray while it's open, and don't load anything other than supported discs. Doing so may damage your discs or DV-CP701. Loading Discs During Playback DVD VCD CD MP3 WMA JPEG This section explains how to load and remove discs without stopping playback. 1 Remote controller OPEN/ CLOSE Press the OPEN/CLOSE [ ] button. The disc tray opens. The disc that's currently playing remains inside the DV-CP701 and its disc bay is empty and won't come to the front. To remove this disc you must stop playback before pressing the OPEN/CLOSE [ ] button. 2 Remote controller DISC SKIP Load or remove discs as required, and press the [DISC SKIP] button to access the other disc bays. The disc numbers appear onscreen. The number of the disc bay on the right is highlighted. 3 Remote controller OPEN/ CLOSE When you've finished, press the OPEN/CLOSE [ ] button again. The disc tray closes. Playback of the current disc continues uninterrupted until you either stop playback or select another disc. Tip: If you press one of the DISC SELECT 1-6 buttons, the disc tray will close, playback of the current disc will stop, and playback of the newly selected disc will start automatically. 21