Onkyo DV-SP404 Instruction Manual - Page 23

DV-SP404.404E_En.book Page 23 Wednesday, June 7, 2006 1:50 PM Connecting the Power/Turning on the DV-SP404/ DV-SP404E Before connecting • Make sure that all the connections on pages 17 - 22 1 are complete (the connection to a TV is required). STANDBY/ON ON ON STANDBY OPEN/ CLOSE PLAY MODE 1 2 3 DISPLAY 4 5 6 7 8 9 0 TOP MENU CLEAR MENU RETURN ENTER SETUP AUDIO ANGLE SUBTITLE ZOOM North American model: Connect the power cord into the power outlet on the wall. Oceanian and European model; Plug the supplied power cord into the AC INLET and then into the power outlet on the wall. • Do not use a power cord other than the one supplied with the DV-SP404/DVSP404E. The power cord supplied is designed for use with the DV-SP404/ DV-SP404E and should not be used with any other device. • Never have the power cord disconnected from the DV-SP404/DVSP404E while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first. To a wall outlet 2 Press STANDBY/ON on the DV- RC-616DV SP404/DV-SP404E or ON on the remote controller. The DVD Player turns on. • To put the DV-SP404/DV-SP404E in Remote controller the standby mode, press STANDBY/ ON on the DV-SP404/DV-SP404E, or ON STANDBY on the remote controller. Be sure to set the volume to minimum before putting the DV-SP404/DV- SP404E in the standby mode for the next use to avoid sudden loud sound reproduction. • Setting the STANDBY/ON button to standby does not shut off the power completely. Note: • This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for five minutes, the screen saver starts. If the disc tray is closed but no disc is playing and no control is pressed for 30 minutes, the player automatically goes into standby. 23