Onkyo HT-R2295 Instruction Manual

Onkyo HT-R2295 Manual

Get Onkyo HT-R2295 PDF manuals and user guides View all Onkyo HT-R2295 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo HT-R2295 manual content summary:

  • Onkyo HT-R2295 | Instruction Manual - Page 1
    AV RECEIVER HT-R2295 Instruction Manual Contents Safety Information and Introduction 2 Table of Contents 5 Connections 11 Turning On & Basic Operations 18 Advanced Operations 35 Controlling Other Components 50 Appendix 56 Remote Control Codes En
  • Onkyo HT-R2295 | Instruction Manual - Page 2
    equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all
  • Onkyo HT-R2295 | Instruction Manual - Page 3
    by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit
  • Onkyo HT-R2295 | Instruction Manual - Page 4
    the AV receiver's remote control sensor, as shown below. Remote control sensor AV receiver Approx. 16 ft. (5 m) En-4 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will
  • Onkyo HT-R2295 | Instruction Manual - Page 5
    Panel 7 Display 8 Rear Panel 9 Remote Controller 10 Controlling the AV Receiver 10 Connections Connecting the AV Receiver 11 Connecting Your Speakers 11 About AV Connections 13 Connecting Components with HDMI 14 Connecting Your Components 15 Connecting Onkyo RI Components 16 Connecting
  • Onkyo HT-R2295 | Instruction Manual - Page 6
    Transformer Processing • HDMI (Audio Return Channel, 3D, Zone 2 • Front-Panel USB Input for Memory Devices and iPod®/iPhone® models * USB input is compatible with iPod/iPhone and Onkyo Bluetooth adapter UBT-1. Miscellaneous • 40 FM/AM Presets • Audyssey 2EQ® to correct room acoustic problems
  • Onkyo HT-R2295 | Instruction Manual - Page 7
    button (18) C HDMI THRU indicator (45) D ZONE 2, OFF buttons (49) E Remote control sensor (4) F LISTENING MODE buttons (28) G Display (8) H DIMMER button (33) S I MEMORY button (24) J TUNING MODE button (23) K DISPLAY button (34) L SETUP
  • Onkyo HT-R2295 | Instruction Manual - Page 8
    KE N For detailed information, see the pages in parentheses. B Z2 (Zone 2) indicator (49) C 3D indicator This lights when a 3D input signal HDMI indicator (45, 61) DIGITAL indicator L ARC (Audio Return Channel) indicator (46) M USB indicator (21, 22) N Message area O SLEEP indicator (33) P Channel
  • Onkyo HT-R2295 | Instruction Manual - Page 9
    cord H VREMOTE CONTROL jack I Composite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT IN, GAME IN, TV/CD IN) J MONITOR OUT V jack K ZONE 2 LINE OUT jacks L SPEAKERS terminals (CENTER, FRONT, SURROUND, SURROUND BACK or FRONT HIGH, ZONE 2) See "Connecting the AV Receiver" for
  • Onkyo HT-R2295 | Instruction Manual - Page 10
    the AV Receiver *1 B C*1 RECEIVER BD E F CG H ID J*1 K*1 E L M F N To control the AV receiver, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See "Entering Remote Control Codes" for
  • Onkyo HT-R2295 | Instruction Manual - Page 11
    Connecting the AV Receiver Surround back/ Surround back/ front high front high right left Surround Surround right left Center Connections Connecting Your Speakers Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you
  • Onkyo HT-R2295 | Instruction Manual - Page 12
    coded for identification purpose. Speaker Front left, Zone 2 left Front right, Zone the instructions AV receiver. • Don't connect one speaker to several terminals. Using a Powered Subwoofer Connections LINE INPUT LINE INPUT Powered subwoofer Corner position 1/3 of wall position To find the best
  • Onkyo HT-R2295 | Instruction Manual - Page 13
    console • Before making any AV connections, read the manuals supplied with your AV components. • Don't connect supported sampling rates are 32/44.1/48/88.2/96 kHz. With HDMI connections, 176.4 and 192 kHz are also supported. Note • The AV receiver does not support SCART plugs. • The AV receiver
  • Onkyo HT-R2295 | Instruction Manual - Page 14
    Blu-ray Disc/DVD player * If your TV doesn't support Audio Return Channel (ARC), you need to connect an optical digital cable together with the HDMI cable to the AV receiver. * When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the
  • Onkyo HT-R2295 | Instruction Manual - Page 15
    TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. ✔: See your turntable's manual for details. • With connection %, you can enjoy Dolby Digital and DTS. (To record or listen the audio in Zone 2 as well,
  • Onkyo HT-R2295 | Instruction Manual - Page 16
    the input source. ■ Remote Control You can use the AV receiver's remote controller to control your other V-capable Onkyo components, pointing the remote controller at the AV receiver's remote control sensor instead of the component. You must enter the appropriate remote control code first (➔ page 53
  • Onkyo HT-R2295 | Instruction Manual - Page 17
    If this is a problem, plug the AV receiver into a different branch circuit. Assembling the AM loop antenna Caution • Be careful not station and position the antenna to achieve the best possible reception. • Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables,
  • Onkyo HT-R2295 | Instruction Manual - Page 18
    Operations Turning Off 1 Press ON/STANDBY on the front panel. or Press RECEIVER followed by  on the remote controller. The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before you turn it off. Tip • For details
  • Onkyo HT-R2295 | Instruction Manual - Page 19
    appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. This section describes the procedure for using the remote controller unless otherwise specified. Playing the Connected Component ■ Operating
  • Onkyo HT-R2295 | Instruction Manual - Page 20
    Contents of USB Devices Press USB first. I J B C K D E L F M G N H O P Q B TOP MENU This button displays the top menu for each media or service. C R/X and ENTER These buttons navigate through the menus. F/S This button cycles through pages. PLAYLIST F/S In Standard Mode (iPod/iPhone
  • Onkyo HT-R2295 | Instruction Manual - Page 21
    , the message "Connecting..." appears on the AV receiver's display. A list of your iPod/iPhone model's contents appears (Extended Mode). 3 Use R/X to select a folder, and then press ENTER to open it. Tip • If you want to operate using the iPod/iPhone or the remote controller, press MODE to switch to
  • Onkyo HT-R2295 | Instruction Manual - Page 22
    a TV that is connected to the HDMI OUT. This section explains how to play music files from a USB device (e.g., USB flash drives and MP3 players). See also: • "USB Features" (➔ page 65). 1 Press USB to select the "USB" input. 2 Plug your USB device into the AV receiver's USB port. While reading the
  • Onkyo HT-R2295 | Instruction Manual - Page 23
    Manual tuning mode In manual tuning mode, FM stations will be in mono. 1 Press TUNING MODE so that the AUTO indicator goes off on the AV receiver into AM and FM stations directly by entering the appropriate frequency. 1 On the remote controller, press AM or FM to select "AM" or "FM", followed by
  • Onkyo HT-R2295 | Instruction Manual - Page 24
    to store the station or channel. The station or channel is stored and the preset number stops flashing. Repeat this procedure for all of your favorite AM/FM radio stations. ■ Selecting Presets 1 To select a preset, use PRESET F/S on the AV receiver, or the remote controller's CH +/-. Tip • You can
  • Onkyo HT-R2295 | Instruction Manual - Page 25
    capturing room acoustical problems over the best listening environment. The Quick Start takes 2 minutes and Full Calibration takes about 10 minutes. Total measurement time varies depending on the number of speakers. Measurement procedure To create a listening environment in your home theater
  • Onkyo HT-R2295 | Instruction Manual - Page 26
    HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. 3 When you've finished making the settings, press ENTER. 2EQ: Auto Setup Powered Zone then press ENTER. 2EQ: Auto Setup Audyssey Subwoofer Front
  • Onkyo HT-R2295 | Instruction Manual - Page 27
    . • Do not connect or disconnect any speakers during Audyssey 2EQ Room Correction and Speaker Setup. • If the AV receiver is muted, it will be unmuted automatically when Audyssey 2EQ Room Correction and Speaker Setup starts. • Changes to the room after Audyssey 2EQ Room Correction and Speaker
  • Onkyo HT-R2295 | Instruction Manual - Page 28
    selects the Stereo listening mode and All Channel Stereo listening mode. • The Dolby Digital and DTS listening modes can only be selected if your Blu-ray Disc/DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, or HDMI). • The listening modes you can select
  • Onkyo HT-R2295 | Instruction Manual - Page 29
    The AV receiver's listening modes can transform your listening room into a movie theater supported by the listening mode. " 4 % ' ( ) This is mono (monophonic) sound. This is stereo (stereophonic) sound. Two independent audio signal channels are reproduced through two speakers. This is 5.1-channel
  • Onkyo HT-R2295 | Instruction Manual - Page 30
    ■ Onkyo-Original DSP Listening Modes Listening Mode Orchestra*1 Or ches t r a or operatic music, this " mode emphasizes the surround channels in 4 order to widen the stereo image, and set via Home menu is disabled. A/V Sync does not have effect on the analog audio. See "Onscreen Setup" for
  • Onkyo HT-R2295 | Instruction Manual - Page 31
    distance, A/V Sync and much of the processing set via Home menu are enabled. See "On-screen Setup" for more details (➔ page 35). Input Source % % use with DTS-ES Matrix soundtracks, which use a matrix-encoded back-channel for 6.1/7.1-channel playback. Use it with DVDs that bear the DTS-ES logo,
  • Onkyo HT-R2295 | Instruction Manual - Page 32
    modes cannot be selected during USB or iPod playback. *2 Based on the audio channel signal contained in the source, the corresponding speakers will output the sound. *3 The AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better
  • Onkyo HT-R2295 | Instruction Manual - Page 33
    HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. Note • The on-screen menus are displayed when: - There is no video input, or - The video input is 480p, 576p, 720p, 1080i, or 1080p. 1 Press RECEIVER followed by HOME. The Home channels
  • Onkyo HT-R2295 | Instruction Manual - Page 34
    Onkyo Setup" for changing the name (➔ page 43). Note • "DOCK" and "TAPE" cannot be selected for the input selector at the same time. • Enter the appropriate remote control code before using the remote AV receiver's display. Tip • Alternatively, you can use the remote controller's HOME (The Zone 2
  • Onkyo HT-R2295 | Instruction Manual - Page 35
    HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. This section describes the procedure for using the remote Common Procedures in Setup Menu Remote indicator ENTER R/X/F/S SETUP RECEIVER RETURN 1 Press RECEIVER followed by SETUP. 2 Use
  • Onkyo HT-R2295 | Instruction Manual - Page 36
    Left Subwoofer Input Ch (Mux) Input Ch (Mono) Panorama Dimension Center Width Height Gain Dolby EX Center Image Listening Angle Audyssey Dynamic page 44) 10. HDMI Setup (➔ page 45) Setting target Volume OSD Remote ID AM/FM Freq Step Auto Standby [HDMI Through] HDMI CEC (RIHD) HDMI Through Audio TV
  • Onkyo HT-R2295 | Instruction Manual - Page 37
    input selectors to or you will be unable to assign HDMI1 - HDMI4 to input selector. Note • If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV receiver selects the video source based on the setting of "2. Component (Component Video Input)". • When an
  • Onkyo HT-R2295 | Instruction Manual - Page 38
    in this section are set automatically by Audyssey 2EQ® Room Correction and Speaker Setup (➔ page 25). Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup, or set them manually, which is useful if you change one of the connected speakers after using Audyssey
  • Onkyo HT-R2295 | Instruction Manual - Page 39
    Zone 2 is turned on, this setting cannot be selected. ■ Crossover (Crossover Frequency) This setting is advantageous for the speakers that you specified as "Small" in the "4. Sp Config (Speaker Configuration)" (➔ page 38). To get the best manuals Setup channels to page 45). - "HDMI CEC (RIHD)" is set
  • Onkyo HT-R2295 | Instruction Manual - Page 40
    Speaker Setup HDMI CEC (RIHD)" is set to "On" (➔ page 45) and you're listening through your TV speakers. - The AV receiver Zone 2 is turned on, the surround back and front high speakers cannot be used. *1 For the center speaker and subwoofer, the level settings made by using the Home channel Dimension
  • Onkyo HT-R2295 | Instruction Manual - Page 41
    channel output is attenuated in order to create the center channel. Changing the value from "0" to "5" will spread the sound of the center channel to left and right (outwards). Theater Note • For best results, we recommend setting "Narrow" to 20° and "Wide" to 40°. 8. Source Setup 1 2 3
  • Onkyo HT-R2295 | Instruction Manual - Page 42
    Audyssey Dynamic EQ solves the problem of deteriorating sound quality as pressure level at the listening position. A home theater system automatically calibrated by Audyssey 2EQ® will preferred volume setting by the user and then monitors how the channels or changing from stereo to surround sound
  • Onkyo HT-R2295 | Instruction Manual - Page 43
    supports HDMI HDMI inputs have been assigned, optical input is automatically selected as a priority. ` Analog: The AV receiver 2-channel PCM AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually
  • Onkyo HT-R2295 | Instruction Manual - Page 44
    Remote ID ■ Remote ID ` 1, 2, or 3 When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from the other components, you can change its remote See "HDMI CEC (RIHD)" in "10. HDMI Setup" for linked operation. • When the HDMI Through
  • Onkyo HT-R2295 | Instruction Manual - Page 45
    remote control of the AV receiver, the name of the Blu-ray Disc/DVD player will be displayed on the AV receiver. instruction manual for details. • When the "HDMI CEC (RIHD)" setting is set to "On", the power consumption in standby mode slightly increases. (Depending on the TV status, the AV receiver
  • Onkyo HT-R2295 | Instruction Manual - Page 46
    ` Auto: The audio signal from your TV tuner can be sent to the HDMI OUT of the AV receiver. The audio return channel (ARC) function allows an ARC capable TV to send the audio stream to the HDMI OUT of the AV receiver. To use this function, you must select the TV/CD input selector and your
  • Onkyo HT-R2295 | Instruction Manual - Page 47
    conditions are met: - Room Correction and Speaker Setup is completed. Note that "Audyssey" requires Night function is set to "Off" when the AV receiver is set to standby. For Dolby TrueHD sources, it will typically mixed for reproduction in a movie theater. CinemaFILTER can be used with the
  • Onkyo HT-R2295 | Instruction Manual - Page 48
    by the AV receiver. To use this setup, you must activate the Powered Zone 2 setting (➔ page 38). Main room TV AV receiver R L Zone 2 Note • With this setup, the volume of Zone 2 is controlled by the AV receiver. • When Powered Zone 2 is used, playback in the main room is reduced to 5.1 channels
  • Onkyo HT-R2295 | Instruction Manual - Page 49
    2 twice. "Z2 Sel: Source" appears on the AV receiver's display. To turn off Zone 2, press OFF. The zone is turned off. ■ Operating on the remote controller To control Zone 2, you must press ZONE2 on the remote controller first. RECEIVER ZONE2 Input selector buttons MUTING VOLR/X 1 Press ZONE2
  • Onkyo HT-R2295 | Instruction Manual - Page 50
    available from the Apple web site. For supported iPod/iPhone models, see the instruction manual of the Onkyo Dock. RI Dock With the RI the AV receiver's remote controller to operate your iPod/iPhone. Note • Enter the appropriate remote control code before using the AV receiver's remote controller
  • Onkyo HT-R2295 | Instruction Manual - Page 51
    control your iPod/iPhone in the Dock with the buttons described further in this section. See "Entering Remote Control Codes" for details on entering a remote control code (➔ page 52). See the Dock's instruction manual for more information. RI Dock • Set the RI Dock's RI MODE switch to "HDD" or "HDD
  • Onkyo HT-R2295 | Instruction Manual - Page 52
    button than the colored buttons is pressed, the operation will be cancelled. • This operation cannot be done while the AV receiver is in Receiver mode or when Zone 2 is active. Note • Though the provided remote control codes are correct at the time of release, they are subject to change. En-52
  • Onkyo HT-R2295 | Instruction Manual - Page 53
    page 52). Controlling a TV TV is preprogrammed with the remote control code for controlling a TV that supports the Q*1 (limited to some models). The TV must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. If controlling your TV via Q doesn't work very
  • Onkyo HT-R2295 | Instruction Manual - Page 54
    /DVD is preprogrammed with the remote control code for controlling a component that supports the Q*1 (limited to some models). The component must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. Use the following remote control codes: ` 32910/33101/33501
  • Onkyo HT-R2295 | Instruction Manual - Page 55
    REMOTE MODE button first. I J K B L C M D E N O F G H P ■ DVD player/DVD recorder operation Available buttons C TOP MENU D R/X/F/S, ENTER E SETUP GUIDE D R/X/F/S, ENTER E SETUP supported. The Q supported by the AV receiver is the CEC system control function of the HDMI standard. En-55
  • Onkyo HT-R2295 | Instruction Manual - Page 56
    Check the volume. The AV receiver is designed for - home theater enjoyment. It has a wide volume range, allowing precise adjustment. If the MUTING indicator is flashing on the AV 33 receiver's display, press the remote controller's MUTING to unmute the AV receiver. While a pair of headphones
  • Onkyo HT-R2295 | Instruction Manual - Page 57
    (Theater . 38 When Powered Zone 2 is used, the LFE channel, the subwoofer such as those that support DVD, the default setting and Speaker Setup has been sound because the AV receiver does not switch received by an HDMI IN can't be heard Since it takes longer to identify the format of an - HDMI
  • Onkyo HT-R2295 | Instruction Manual - Page 58
    AV receiver is connected is selected. ■ There's no picture from a source connected to an HDMI IN Reliable operation with an HDMI-to-DVI adapter remote control 52 code. Make sure to set the same ID on both the AV receiver 44 and remote controller. ■ Can't control other components If it's an Onkyo
  • Onkyo HT-R2295 | Instruction Manual - Page 59
    AV receiver's remote controller, - point it toward your AV receiver. If you still can't control your iPod/iPhone, start - playback by pressing your iPod/iPhone model's Play button. Remote may be automatically adjusted - with values best-suited for your home theater. ■ How do I change the language
  • Onkyo HT-R2295 | Instruction Manual - Page 60
    SETUP until "Video ATT :On" appears on the AV receiver's display. Then, release both buttons. To turn the setting off, repeat the above process so that "Video ATT :Off" appears on the AV receiver five seconds, and then plug it back in. Onkyo is not responsible for damages (such as CD rental fees
  • Onkyo HT-R2295 | Instruction Manual - Page 61
    on the formats supported by your components. Use the following sections as a guide. The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. Note • The on-screen setup menus are
  • Onkyo HT-R2295 | Instruction Manual - Page 62
    • Sharp TV ■ Players/Recorders • Onkyo and Integra Q-compatible players • Toshiba AV receiver will switch to the HDMI input of the player/recorder that is playing back. • Operation of the player/recorder is possible using the remote controller supplied with the AV receiver. * Depending on the model
  • Onkyo HT-R2295 | Instruction Manual - Page 63
    AV receiver using an optical digital cable. Note • When the audio return channel (ARC) function is used with an ARC capable TV, this connection is not necessary (➔ page 46). 3. Connect the HDMI the input to which the AV receiver is connected. 5. Following the operating instructions of the TV, select
  • Onkyo HT-R2295 | Instruction Manual - Page 64
    by using an HDMI-toDVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.) The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display the picture. Supported Audio Formats • 2-channel linear PCM (32
  • Onkyo HT-R2295 | Instruction Manual - Page 65
    to your USB MP3 player's instruction manual for details. • Protected WMA music files on an MP3 player cannot be played. • Onkyo accepts no responsibility whatsoever for the loss or damage to data stored on a USB device when that device is used with the AV receiver. We recommend that you back up
  • Onkyo HT-R2295 | Instruction Manual - Page 66
    trademarks of Onkyo Corporation. "The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing of Audyssey Laboratories, Inc. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. En-66 Appendix
  • Onkyo HT-R2295 | Instruction Manual - Page 67
    continuous power per channel, 6 ohm loads, 1 channel driven at 1 Dimensions (W × H × D) 435 mm × 150 mm × 328 mm 17-1/8" × 5-7/8" × 12-15/16" Weight 8.3 kg (18.3 lbs.) ■ HDMI Input Output Video Resolution Audio Format Supported R) Phones 1 (ø 6.3) ■ Others Setup Mic USB RI 1 1 (Front) 1
  • Onkyo HT-R2295 | Instruction Manual - Page 68
    Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 http://www.us.onkyo.com/ Europe Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49
  • Onkyo HT-R2295 | Instruction Manual - Page 69
    remote control code. The REMOTE MODE button/Remote indicator flashes twice. If the remote control code is not entered successfully, the REMOTE MODE button/Remote indicator will flash once slowly. Notes: • The flashing element of the remote controller will differ according to your AV receiver's model
  • Onkyo HT-R2295 | Instruction Manual - Page 70
    de [RECEIVER], [TV] et du bouton multi zone, vous pouvez affecter des codes de télécommande de n'importe quelle catégorie pour les boutons REMOTE MODE. REMOTE MODE/indicador Remote parpadeará una vez despacio. Notas: • El parpadeo del mando distancia será distinto según el modelo de receptor de AV
  • Onkyo HT-R2295 | Instruction Manual - Page 71
    Remote-Anzeige einmal langsam. Hinweise: • Das blinkende Element auf der Fernbedienung unterscheidet sich je nach AV-Receiver-Modell. • Die Fernbedienung ist mit den Voreinstellungen der Fernbedienung der verschiedenen Komponenten vorkonfiguriert. Indem ein Code aus der Liste der Fernbedienungscodes
  • Onkyo HT-R2295 | Instruction Manual - Page 72
    MODE/Remote-indicator eenmaal traag knipperen. Opmerkingen: • Het knippergedeelte van de afstandsbediening zal verschillen ten opzichte van het model van uw AV-receiver. • De afstandsbediening is voorgeprogrammeerd met voorkeuzetoetsen van verschillende componenten. Door het invullen van een code
  • Onkyo HT-R2295 | Instruction Manual - Page 73
    d3&.05&.0 f ‫ء‬จj 7 d f f d f d d f d f d d f d f d f 遥控代码 Remote Control Codes 1 REMOTE MODE DISPLAY 3 REMOTE MODE Integra Remote Mode Display RECEIVER TV RECEIVER TV REMOTE MODE REMOTE MODE CD CD TV/CD （电视 /CD）]。 2 在 30 5 REMOTE MODE REMOTE MODE AV 5
  • Onkyo HT-R2295 | Instruction Manual - Page 74
    01877, 01982, 02187 Cox 01376, 01877 Daeryung 01877 Digeo 02187 DX Antenna 01500 France Telecom 00817 Freebox 01482 Fujitsu 01497 Humax 00660, 02142, 02447 01376 Suddenlink 01376, 01877 Thomson 01582 6 Remote Control Codes Cable/PVR Combination Time Warner 01376, 01877,
  • Onkyo HT-R2295 | Instruction Manual - Page 75
    70000, 70032, 70157 70490, 70032, 70036 70157 70626, 70766 70072 70626 70626 71323 70626 70000 71830, 72304 73511 MD Onkyo Sony TEAC Yamaha Remote Control Codes 70868 70490, 70000 72977 70490 Cassette Deck Aiwa Arcam Audiolab Carver Denon Grundig Harman/Kardon Inkel JVC Kenwood Magnavox Marantz
  • Onkyo HT-R2295 | Instruction Manual - Page 76
    02657 02294 00858, 02345 03107 01998, 02802 01385 02345 02769 02378 Receiver Onkyo 52503 Satellite Set Top Box @sat 01300 @Sky 01334 Acoustic Solutions DSE 02280, 02418 DSTV 00879, 00642, 01433 8 Remote Control Codes Satellite Set Top Box Durabrand 01284 Echostar 00775, 00853
  • Onkyo HT-R2295 | Instruction Manual - Page 77
    Box Hama 01567 Hanseatic 01100 Hirschmann 00173 Hitachi 01284 Hornet 01300 HTS 00775 Humax 01377, 01176, 01427, 01675, 01808, 01882, 01662, 02986 Sansui 01251 Sanyo 01626 Sat Control 01300 9 Remote Control Codes Satellite Set Top Box Sat Industrie 01611 SAT+ 01409 Satplus
  • Onkyo HT-R2295 | Instruction Manual - Page 78
    00099 Samsung 01175, 01206, 01662 Sat Control 01300 Schneider 01206 Sedea Electronique 01206 SKY 01175, 01662, 01693, 01850, 02754 Remote Control Codes SAT/PVR Combination SKY Deutschland 02754 SKY Italia 01693, 01850 SKY New Zealand 02211 SKY PerfecTV! 02299, 03099 Sky+ 01662
  • Onkyo HT-R2295 | Instruction Manual - Page 79
    10037 11363 Television DMTech Domeos Drean DSE Dual Durabrand Dux DX Antenna Dynatron Dynex e-motion E:max Easy Living ECE Elbe Electrograph Element Epson Erres ESA ESC Euroman Europa Europhon Evesham Excello Exquisit Remote Control Codes 12001 10668 10037 10698 10037, 11037, 11585, 11667 10178
  • Onkyo HT-R2295 | Instruction Manual - Page 80
    10037 10208 10208 10037 11709 10208 10556, 10037, 10698 10556, 10634, 10499 10556 10650, 10653, 10508, 11428, 11601, 12271 10037 Remote Control Codes Television Karcher Kathrein Kendo Kennex Kioto Kiton KLL Kneissel Koenig Kolin Kolster Konka Korpel Kosmos Kunlun L&S Electronic Lavic Lavis Lecson
  • Onkyo HT-R2295 | Instruction Manual - Page 81
    -Tec O.K.Line Oceanic Odys Okano OKI Olevia Omni Onei Onida Onimax Onix Onkyo Onn Onyx Opera Optimus Orbit Orion 13 11755 10556, 10037, 10714 10556 Philips Phocus Phoenix Phonola Pioneer Plantron Playsonic Powerpoint Prinston Remote Control Codes 10037 10668, 11037 10556, 10037 10037 10037 10556,
  • Onkyo HT-R2295 | Instruction Manual - Page 82
    Tec Tech Line Technica Technics Technika TechniSat Technisson Techno Technosonic Techvision Techwood Tecnimagen Teco Tedelex Teknika TELE System Telecor Remote Control Codes 10208 11614, 11775 10171, 11394, 11864, 11886 10171, 11394 10178, 11755 11610 10037 10178 10178 10650 10037, 11248, 11324
  • Onkyo HT-R2295 | Instruction Manual - Page 83
    20739 20616 20739 20616 20616 20739 PVR DirecTV Humax Panasonic Philips 20739 20739 20616 20739 15 PVR ReplayTV Sonic Blue TiVo Remote Control Codes 20616 20616 20739 TV/VCR Combination Amstrad 10171 Ferguson 10625 Fidelity 10171 GoldStar 10037 Grundig 10556, 10037, 10195 LG 10178
  • Onkyo HT-R2295 | Instruction Manual - Page 84
    Medion Memorex Metz Micromedia Micromega Microsoft Minax Mitsubishi Momitsu NAD NEC Onkyo Oppo 16 30713 30490, 30534 30713, 33052 32545 30741, 31602 30627, 31612, 32147, 30571, 31634 30575, 32545 Remote Control Codes DVD Orion Ormond Pacific Palladium Panasonic Pelican Accessories Philco Philips
  • Onkyo HT-R2295 | Instruction Manual - Page 85
    32299 30675 30646 30490 30675 30675 30741 30741 31664 30646 Remote Control Codes DVD-R Irradio JVC LG Loewe Magnavox Medion Panasonic Philips 30675 30741 31639, 32277, 32551 31597 30646 30741 HD-DVD Integra LG Microsoft Onkyo Xbox 32901, 33104, 33504 30741 32083 32901, 33104 33504 32083 TV/DVD
  • Onkyo HT-R2295 | Instruction Manual - Page 86
    Technica 11037, 30713 Telefunken 10698 Teletech 11037, 30713 Thomson 10625 Toshiba 11524 United 11037, 30713 Universum 30713 Vestel 11037 Viewsonic 12049 Weltstar 11037, 30713 18 Remote Control Codes
  • Onkyo HT-R2295 | Instruction Manual - Page 87
    Memo Remote Control Codes 19
  • Onkyo HT-R2295 | Instruction Manual - Page 88
    SN 29401471CODE (C) Copyright 2013 Onkyo Corporation Japan. All rights reserved. Y1212-1 *29401471CODE*
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
E
n
AV RECEIVER
HT-R2295
Instruction Manual
Contents
Safety Information and Introduction
............
2
Table of Contents
...........................................
5
Connections
.................................................
11
Turning On & Basic Operations
..................
18
Advanced Operations
..................................
35
Controlling Other Components
...................
50
Appendix
.......................................................
56
Remote Control Codes