Onkyo HT-R2295 Instruction Manual - Page 47

Note • These settings cannot be calibrated in either of the following cases: - A pair of headphones is connected. - The AV receiver is muted. • Speakers that are set to "No" or "None" in the "4. Sp Config (Speaker Configuration)" (➔ page 38) cannot be adjusted. Audyssey® ■ Audyssey See "Audyssey" in "8. Source Setup" (➔ page 41). ■ Dynamic EQ See "Dynamic EQ" in "8. Source Setup" (➔ page 42). ■ Dynamic Volume See "Dynamic Volume" in "8. Source Setup" (➔ page 42). Note • These technologies can be used when all the following conditions are met: - Room Correction and Speaker Setup is completed. Note that "Audyssey" requires the "Audyssey 2EQ Full Calibration" method. - Any listening mode other than Direct is selected. - A pair of headphones is not connected. - The input selector other than USB is selected. • The setting is stored individually for each input selector. Late Night ■ Late Night For Dolby Digital and Dolby Digital Plus sources, the options are: ` Off ` Low: Small reduction in dynamic range. ` High: Large reduction in dynamic range. For Dolby TrueHD sources, the options are: ` Auto: The Late Night function is set to "On" or "Off" automatically. ` Off ` On Turn this setting on to reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels-ideal for watching movies late at night when you don't want to disturb anyone. Note • The effect of the Late Night function depends on the material that you are playing and the intention of the original sound designer, and with some material there will be little or no effect when you select the different options. • The Late Night function can be used only when the input source is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD. • The Late Night function is set to "Off" when the AV receiver is set to standby. For Dolby TrueHD sources, it will be set to "Auto". Music Optimizer ■ Music Optimizer ` Off ` On The Music Optimizer function enhances the sound quality of compressed music files. The M.Opt indicator lights on the AV receiver's display. Tip • Alternatively, you can use the AV receiver's MUSIC OPTIMIZER. Note • The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below 48 kHz and analog audio input signals. • The Music Optimizer is disabled when the Direct listening mode is selected. • The setting is stored individually for each input selector. CinemaFILTER Advanced Operations ■ Cinema Filter ` Off ` On Turn this setting on to soften overly bright movie soundtracks, which are typically mixed for reproduction in a movie theater. CinemaFILTER can be used with the following listening modes: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Pro Logic IIx Movie, Dolby Pro Logic II Movie, Dolby Pro Logic IIz Height, Multichannel, DTS, DTS-ES, DTS Neo:6 Cinema, DTS 96/24, Neo:6, DTS-HD High Resolution Audio, DTS-HD Master Audio and DTS Express. Note • The CinemaFILTER may not work when used with certain input sources. En-47