Onkyo HT-R510 Owner Manual - Page 19
Connecting, compatible AV Components - set up
View all Onkyo HT-R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting -compatible AV Components With (Remote Interactive) you can control your compatible Onkyo CD player, DVD player, or cassette recorder with the HT-R510's remote controller, and use the following special functions: ■ Auto Power On When you turn on an AV component connected via while the HT-R510 is in Standby, the HT-R510 automatically turns on and selects that AV component as the input source. This function will not work if the AV component's power cord is connected to the HT-R510's AC OUTLET, or if the HT-R510 is already on. ■ Auto Source Select When you press the play button on an AV component connected via , the HT-R510 automatically selects that AV component as the input source. ■ Auto Power Off When you set the HT-R510 to Standby, all AV components connected via also enter Standby. See page 41 for information on using the remote controller to control the other functions of your -compatible AV components. Connecting -compatible Components To use , you need to connect the HT-R510's connector to the connector on the other AV component with an cable. An cable is supplied with each -compatible CD player, DVD player, and cassette recorder. Example: Onkyo DVD player Connecting several -compatible Onkyo AV components DIGITAL OUT COAXIAL REMOTE CONTROL L R ANALOG OUTPUT HT-R510 REMOTE CONTROL connector Onkyo CD player cable You must make an analog RCA/phono connection between your HT-R510 and AV component, even if they are connected digitally. connector Onkyo cassette recorder COMPONENT VIDEO ANTENNA VIDEO 1 / 2 / 3 DVD IN IN OUT AM FM 75 Y PB PR DIGITAL INPUT OPTICAL COAXIAL 2 1 REMOTE CONTROL VIDEO 2 IN VIDEO 1 OUT IN DVD MONITOR IN OUT VIDEO S VIDEO IN OUT IN L SUBWOOFER PRE OUT R CD TAPE IN OUT IN FRONT SURR CENTER L L R VIDEO 2 VIDEO 1 R DVD SUB WOOFER FRONT SPEAKERS B FRONT SPEAKERS A L SURROUND SPEAKERS L CENTER SPEAKER Disconnect AC OUTLET AC 120V 60 Hz the power cord before SWITCHED 120W 1 A MAX. making any connections! L R R R SURROUND BACK SPEAKER HT-R510 Notes: • Push the plugs in all the way to make a good connection. • Use only cables for connections. • You must make an analog RCA/phono connection between your HT-R510 and the other AV component, even if they are connected digitally. • If an AV component has two connectors, you can connect either one to the HT-R510. The other connector is for connecting additional -compatible components. • Connect the HT-R510's connector to only Onkyo AV components. Connecting to other manufacturer's AV components may cause them to malfunction. • Some Onkyo -compatible AV components may not support the special functions described above. 19