Onkyo PR-5507 Owners Manual - Page 108
Audio TV Out, Notes, Lip Sync, Disable, Enable, x.v.Color, HDMI Lip Sync disabled default.
View all Onkyo PR-5507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Advanced Setup-Continued HDMI Audio TV Out Off: HDMI audio is not output to TV (default). On: HDMI audio is output to TV and the sound will be heard from the TV speakers. This preference determines whether audio received at the HDMI input is output from the HDMI outputs. You may want to turn this preference on if your TV is connected to the HDMI output and you want to listen to the audio from a component that's connected to an HDMI input, through your TV's speakers. Normally, this should be set to "Off". Notes: • If "On" is selected and the signal can be output by the TV, the AV controller will output no sound through its speakers. • If "On" is selected, "TV Speaker On" appears on the Display by pressing the [DISPLAY] button. • When "TV Control" is set to "On", this setting is fixed at "Auto". • With some TVs and input signals, no sound may be output even when this setting is set to "On". When you try to get audio from your TV, signals from the source component may be converted to the format supported by your TV. • When the "Audio TV Out" setting is set to "On" or "TV Control" is set to "On" to hear from speakers of -compatible TV (page 27), by controlling the AV controller's volume, the AV controller's speakers will produce sound while the TV's speakers are muted. If your TV is not compatible with , the volume level will not change. To stop the AV controller's speakers producing sound, change the settings, change your TV's settings, or turn down the AV controller's volume. • When the "Audio TV Out" setting is set to "On", the remote controller's [AUDIO] button is disabled. • If the "Monitor Out" setting is set to "Both (Main)" or "Both (Sub)" (page 47) and if your TV connected to a priority output cannot output the audio, the sound will be heard from AV controller's speakers. Lip Sync Disable: HDMI Lip Sync disabled (default). Enable: HDMI Lip Sync enabled. The AV controller can be set to automatically correct any delay between the video and the audio, based on the data from the connected monitor. Notes: • This function works only if your HDMI-compatible TV supports HDMI Lip Sync. • You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen (page 98). • If the "Monitor Out" setting is set to "HDMI Main", "Both (Main)" or "Both" (page 47), the delay will be corrected in accordance with the monitor connected to HDMI OUT MAIN. On the other hand, if "HDMI Sub" or "Both (Sub)" is selected, the delay will be corrected in accordance with the monitor connected to HDMI OUT SUB. x.v.Color Disable: "x.v.Color" disabled (default). Enable: "x.v.Color" enabled. If your HDMI source and HDMI-compatible TV both support the "x.v.Color", you can enable "x.v.Color" on the AV controller with this setting. Notes: • If the color is unnatural when "x.v.Color" is set to "Enable", change the setting to "Disable". • Refer to the connected component's instruction manual for details. • If the "Monitor Out" setting is set to "Both (Main)" or "Both (Sub)" (page 47) and if your TV connected to a priority output does not support x.v.Color, output will be without x.v.Color control. 108