Onkyo PR-5507 Owners Manual - Page 71

Universal Port Option UP-A1 Dock for iPod About the UP-A1 Dock With the UP-A1 Dock (sold separately), you can easily play the music, photo, or movie stored on your Apple iPod through the AV controller and enjoy great sound. You can use the AV controller's remote controller to operate your iPod. For the latest information on the Dock, see the Onkyo Web site at: http://www.onkyo.com iPod adapter Dock connector Compatible iPod models For information about which iPod models are supported by the UP-A1 Dock, see the UP-A1 Dock instruction manual. Note: Before using the UP-A1 Dock, update your iPod with the latest software, available from the Apple Web site. Function Overview ■ Basic Operation Note: The AV controller may take several seconds to startup, so you might not hear the first few seconds of the first song. • Auto Power On Function If you start iPod playback while the AV controller is on Standby, the AV controller will automatically turn on and select your iPod as the input source. • Direct Change Function If you start iPod playback while listening to another input source, the AV controller will automatically select your iPod as the input source. • Using the AV controller's Remote Controller You can use the AV controller's remote controller to control basic iPod functions. Operating Notes: • Functionality depends on your iPod model and gener- ation. • Before selecting a different input source, stop iPod playback to prevent the AV controller from selecting the iPod input source by mistake. • If any accessories are connected to your iPod, the AV controller may not be able to select the input source properly. • While your iPod is in the UP-A1 Dock, its volume control has no effect. If you adjust your iPod models volume control while it's in the UP-A1 Dock, make sure it's not set too high before you reconnect your headphones. • The Auto Power On function will not work if you set your iPod in the UP-A1 Dock while it is playing. • When Zone 2 or 3 is turned on, you can't use Auto Power On and Direct Change functions. ■ Using Your iPod models Alarm Clock You can use your iPod models Alarm Clock function to automatically turn on your iPod and the AV controller at a specified time. The AV controller's input source will automatically be set to the [PORT] selector. Notes: • To use this function, your iPod must be in the UP-A1 Dock, and the UP-A1 Dock must be connected to the AV controller. • When you use this function, be sure to set the AV controller's volume control to a suitable level. • The AV controller may take several seconds to startup, so you might not hear the first few seconds of the first song. • When Zone 2 or 3 is turned on, you can't use this function. • You cannot use this function for sound effects on your iPod. ■ Charging Your iPod models Battery The UP-A1 Dock charges your iPod models battery while your iPod is in the UP-A1 Dock and connected to the UNIVERSAL PORT jacks on the AV controller. While your iPod is seated in the UP-A1 Dock, its battery will be charged when the AV controller is set to "On" or "Standby". Note: When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases. 71