Onkyo TX-8220 Stereo Receiver Owners Manual - English/Spanish/French - Page 22

> Before Start > Part Names > Install > Playback Setup | Others OPTICAL jacks. If you do not assign a jack, select "----". CD BD/DVD CBL/SAT LINE TV Assign a desired DIGITAL IN COAXIAL jack or DIGITAL IN OPTICAL jack to the "CD" input selector. (Default Value is "COAX") Assign a desired DIGITAL IN COAXIAL jack or DIGITAL IN OPTICAL jack to the "BD/DVD" input selector. (Default Value is "----") Assign a desired DIGITAL IN COAXIAL jack or DIGITAL IN OPTICAL jack to the "CBL/SAT" input selector. (Default Value is "----") Assign a desired DIGITAL IN COAXIAL jack or DIGITAL IN OPTICAL jack to the "LINE" input selector. (Default Value is "----") Assign a desired DIGITAL IN COAXIAL jack or DIGITAL IN OPTICAL jack to the "TV" input selector. (Default Value is "OPT") 0 "----" cannot be selected for "TV". 0 Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 24 bit. SP Impedance Set the impedance (≠) of the connected speakers. "4 ohm": When any of the connected speakers have 4 ≠ or more to less than 6 ≠ impedance, or when speaker systems are connected to both of the SPEAKERS A/B terminals "6 ohm (default value)": When the connected speakers all have 6 ≠ or more impedance 0 Note that when connecting to both SPEAKERS A and B terminals, connect speakers with 8 ≠ to 16 ≠ impedance to both A and B. 0 For impedance, check the indications on the back of the speakers or their instruction manual. Tuner Setting The setting cannot be selected when input other than TUNER is selected. Preset Write Preset Erase Name Edit Tuning Mode Search Level (European models) Station Order (European models) DAB Auto Scan (European models) You can register up to 40 of your favorite radio stations. While the preset number is flashing (about 8 seconds), repeatedly press the cursor Left/Right buttons on the remote controller to select a number between 1 and 40. Delete a registered preset number. 0 This setting is not available if you have not selected a preset number. Set simple names for the stations you have preset. The set name will be shown on the main unit display. To name a preset radio station, press TUNER on the remote controller, select AM (North American models)/FM and select the preset number. (Preset names cannot be given to DAB stations.) For details on how to enter text, refer to "Naming Radio Stations Registered as Presets" (P19). 0 This setting is not available if you have not selected a preset number. Switches tuning to AM (North American models)/FM automatic tuning/manual tuning. "Auto (default value)": Tuning Automatically. "Mono": Tuning Manually. 0 If automatic tuning regularly stops on FM stations with weak reception when "Normal (default value)" is selected, select "Strong" so only those FM stations with strong reception are selected. Change the order stations are displayed: "Alphabet (default value)": Sort stations alphabetically. "Multiplex": Sort stations by multiplex. 0 The setting cannot be selected when an input other than DAB is selected. You can run the auto scan when new DAB stations are added or when you move house. 0 The setting cannot be selected when an input other than DAB is selected. 22