Onkyo TX-DS484 Owner Manual - Page 6

Audio equipment connections • On each pair of input jacks, a red connector (marked R) corresponds to the right Audio connection cable channel, and a white connector (marked L) to the left channel. L (Left) L • Please refer to the instruction manual of each component when making any con- nections. • This receiver is designed for use with turntables using moving magnet cartridges. R (Right) R • Insert the plugs and connectors securely. Remember that improper connection can result in noise, poor performance, or damage to the equipment. Improper connection Tape Deck INPUT (REC) OUTPUT (PLAY) Insert completely See page 7 ANTENNA R (REC) AM OUT TAPE (PLAY) I N DVD FM 75 VIDEO 1 GND L VIDEO 2 R R PHONO CD SUB WOOFER PRE OUT L COAXIAL COAXIAL 2 1 MONITOR OUT I N R L FRONT SURROUND I N OUT SUB CENTER WOOFER I N L V MULTIɹCH INPUT OPTICAL DIGITAL INPUT R L A B R L FRONT SPEAKERS CENTER R L REMOTE CONTROL CENTER SPEAKER R L SURROUND SPEAKERS AC OUTLETS AC 230V 50Hz SWITCHED TOTAL 100W MAX. TX-DS484 Ground OUTPUT Turntable OUTPUT (ANALOG) CD Player OUTPUT (COAXIAL) OUTPUT (DIGITAL) : signal flow To wall outlet Do not plug in the power cord until all connections have been made. • A DVD or other component equipped with a digital output can be connected to this receiver. The digital connection must be used in conjunction with an analog connection, because if the analog cable is disconnected, the audio output from TAPE OUT and VIDEO 2 will not work. 6