Onkyo TX-DS777 Owner Manual - Page 59
Trouble, Cause, Remedy - troubleshooting
View all Onkyo TX-DS777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Troubleshooting guide Trouble FM/AM TUNED and STEREO indicators light but sound is distorted and stereo separation is bad. TUNED and STEREO indicators flicker and hiss is heard on FM. No station is recalled. Video & audio Desired picture does not appear when MULTI CH INPUT button is pressed. No on-screen display. Picture and sound do not match. No sound, or sound of the selected source is not heard. No picture appears on the TV screen (or monitor). Others LATE NIGHT function cannot be used. LFE LEVEL function cannot be used. Cinema Re-EQ function cannot be used. Parameter cannot be set for Front Effect, Reflect Level, Reverb Level, Room Size, etc. Front panel controls function but remote controller does not. Cause Remedy See page • Station is too strong. • Change to FM indoor antenna. 15 • Multiple reflection of the radio waves because • Use antenna which has better directivity and select a 15 of tall buildings or mountains. point where the distortion is least. • Station is too weak. • Install an outdoor FM antenna. 15 • Stereo FM broadcasts cover only about half the • Change the position or direction of the outdoor an- 15 distance of an ordinary broadcast. tenna. • The power cord has been unplugged or the • The memory contents are lost. Store all stations again. 25 POWER switch has been turned off for a long time. • Wrong connection. • No video input is assigned. • Check the connection again. Insert the plugs and con- 9 nectors completely. • Assign a proper video input. 33 • Improper connection. • Improper OSD selector setting. • Improper connection. • Improper video is assigned. • The digital input selector is not set properly. • Check connections. • Set the OSD selector properly. • Check connections. • Check Video Assign setting. • Check Digital Input setting. 8 8, 9 8 40 23, 29 • The TV (or monitor) is not set to receive the out- • Set the TV (or monitor) to the receiver input. - put signals from the receiver. • The video cable is not connected securely. • Check connections. 8 • Only S-Video connection is made. • Make also video connection. 8 • Playback source is not Dolby Digital encoded. • Check that the DOLBY DIGITAL indicator lights up 38 on the display. • Playback source is not Dolby Digital , DTS, • Check that the DOLBY DIGITAL , DTS, MPEG in- 38 MPEG encoded. dicator lights up on the display. • The listening mode is set to "Stereo," "5ch ste- • See the table on page 38. 38 reo" or "Direct." • Parameter may not be set depending on the lis- • See the table on page 38. 38 tening mode. • No batteries in remote controller. • Insert batteries. 5 • Batteries have worn out. • Replace batteries. 5 • The remote controller is not pointed at the re- • Point the remote controller at the remote sensor of the 5 mote sensor of the receiver. reciever. • The remote controller is too far from the • Operate the remote controller within 16 feet (5m). 5 reciever. Also refer to the respective instruction manuals of the video disc player, video cassette recorder, TV monitor, etc., that compose your entertainment system. Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static electricity. If this happens, press the POWER switch on the unit and then press it in again after about five seconds. 59