Onkyo TX-NR575 Owners Manual - Basic/Advanced - Page 46
Setting Item, Default Value, Setting Details, Distance
View all Onkyo TX-NR575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ˙ 3. Distance Set the distance from each speaker to the listening position. feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you can set between 0.03 m and 9.00 m in increments of 0.03 m. Setting Item Front Left Center Front Right Height Left Height Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer Default Value 12.0ft/3.60m 12.0ft/3.60m 12.0ft/3.60m 9.0ft/2.70m 9.0ft/2.70m 7.0ft/2.10m 7.0ft/2.10m 7.0ft/2.10m 7.0ft/2.10m 12.0ft/3.60m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Distance units can be switched by pressing MODE on the remote controller. When the unit is set as 13