Onkyo TX-NR6050 TX -NR -Channel AV Receiver Instruction Manual - English - Page 12
Display - 7 2 channel
View all Onkyo TX-NR6050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Display B: Audio is output only to ZONE B. AB: Audio is output to both ZONE A and ZONE B. 3. Lights according to the type of input digital audio signal and the listening mode. 4. Lights in the following conditions. TUNED: Receiving AM /FM radio FM ST: Receiving FM stereo. SLEEP: Sleep timer is set. AUTO STBY: Auto Standby is set. ( →p122) 5. Blinks when muting is on. 6. Displays various information of the input signals. 7. Cursors ( / / / ): These may light when performing operations while "NET" is selected with the input selector. / light when there are multiple folders or files that are available to be selected. / light when text information does not fit with the range provided by "6". 1. Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode. 2. Lights in the following conditions. : Headphones are connected. Z2: ZONE 2 is on. : Connected by BLUETOOTH. : Connected by Wi-Fi. NET: Lights when connected to the network with the "NET" input selector. It will blink if incorrectly connected to the network. USB: Lights when the "NET" input selector is selected, a USB device is connected and the USB input is selected. It will blink if the USB device is not properly connected. HDMI: HDMI signals are input and the HDMI input is selected. DIGITAL: Digital signals are input and the digital input is selected. A: Audio is output only to ZONE A. 12