Onkyo TX-NR6050 TX -NR -Channel AV Receiver Instruction Manual - English - Page 123
Connected Device Default Value, Output Zone Default Value: Main, Bluetooth Wakeup Default Value: Off
View all Onkyo TX-NR6050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
5. Hardware Bluetooth Wakeup (Default Value: Off) This function wakes up the unit on standby by connecting a BLUETOOTH enabled device.This is effective when "Bluetooth" -"Bluetooth Receiver" is set to "On". On When this function is used • When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate. Off When this function is not used • This setting is fixed to "Off" if "Bluetooth" -"Bluetooth Receiver" is set to "Off". • This setting is also fixed to "Off" if "Bluetooth" - "Bluetooth Receiver" - "Auto Input Change" is set to "Off". • Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can be selected when the network function is activated. Setup 5. Works with SONOS Change the settings to connect with the Sonos Connect. (SONOS-1/SONOS-2) Input Selector (Default Value: Off) Select the input selector to which the Sonos Connect is connected. • Selecting "Off" disables the interlock function with Sonos. Connected Device (Default Value: -) Displays the Sonos Connect connected to the same network as the network of this unit. Press the ENTER button to select the connected Sonos Connect. • Products (e.g. Play:3 unequipped with an output terminal) other than the Sonos Connect are also displayed in the device list and selectable. In that case, when playback on the Sonos side starts, the input is switched, however, audio is not output. Select the room name of the connected Sonos Connect. • Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. • To use this function, set "Input Selector" beforehand. Output Zone (Default Value: Main) Select the zone where you want to listen to the music. • To use this function, set "Input Selector" beforehand. Main Zone 2 Main/Zone 2 Outputs audio only to the main room (where this unit is located). Outputs audio only to the separate room (ZONE 2). Outputs audio to both the main room and separate room. 123