Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver Instruction Manual - Eng - Page 112
Distance, Level Calibration, Surr Back Right Default Value: 7.0 ft/2.10 m
View all Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
2. Speaker 3. Distance Set the distance from each speaker to the listening position. Front Left (Default Value: 12.0 ft/3.60 m) Center (Default Value: 12.0 ft/3.60 m) Front Right (Default Value: 12.0 ft/3.60 m) Height Left (Default Value: 9.0 ft/2.70 m) Height Right (Default Value: 9.0 ft/2.70 m) Surround Right (Default Value: 7.0 ft/2.10 m) Surr Back Right (Default Value: 7.0 ft/2.10 m) Surr Back Left (Default Value: 7.0 ft/2.10 m) Surround Left (Default Value: 7.0 ft/2.10 m) Subwoofer (Default Value: 12.0 ft/3.60 m) • Default values vary depending on the regions. • The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m. (Height Left, Height Right, Surr Back Right, Surr Back Left): • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. Setup 4. Level Calibration Adjust the volume level of each speaker. Front Left (Default Value: 0.0 dB) Center (Default Value: 0.0 dB) Front Right (Default Value: 0.0 dB) Height Left (Default Value: 0.0 dB) Height Right (Default Value: 0.0 dB) Surround Right (Default Value: 0.0 dB) Surr Back Right (Default Value: 0.0 dB) Surr Back Left (Default Value: 0.0 dB) Surround Left (Default Value: 0.0 dB) Subwoofer (Default Value: 0.0 dB) Select a value between "-12.0 dB" and "+12.0 dB" ("-15.0 dB" and "+12.0 dB" for Subwoofer) (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. (Height Left, Height Right, Surr Back Right, Surr Back Left): • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. 112