Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver Instruction Manual - Eng - Page 168
General Specifications, North American and, Taiwanese models, European models
View all Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
General Specifications Appendix Amplifier Section Rated Output Power Maximum Effective Output Power Dynamic Power (IEC60268-Short-term maximum output power) THD+N (Total Harmonic Distortion + Noise) Input Sensitivity and Impedance Rated RCA Output Level and Impedance Phono Maximum Input Signal Voltage Frequency Response Tone Control Characteristics North American and Taiwanese models (North American models) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. (FTC) (Taiwanese models) 7 ch × 165 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD (IEC) (North American models) 210 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD (Taiwanese models) 7ch × 175 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD (JEITA) European models Australian and Asian models 7 ch × 165 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD (IEC) 175 W at 6 ohms, 1 kHz, 1 ch driven 7ch × 175 W at 6 ohms, 1 kHz, 1 ch of 10% THD (JEITA) driven of 10% THD (JEITA) 240 W (3 Ω, Front), 210 W (4 Ω, Front), 120 W (8 Ω, Front) 0.08% (20 Hz - 20,000 Hz, Rated output power) 200 mV/47 kΩ (LINE(RCA)), 3.5 mV/47 kΩ (PHONO MM) PRE OUT (SUBWOOFER) : 1 V/470 Ω LINE OUT (ZONE 2/ZONE B) : 200 mV/2.2 kΩ LINE OUT (ZONE 2/ZONE B)(*) : 200 mV/470 Ω *1 V/470 Ω if changed to PRE OUT (FRONT) 70 mV (MM 1 kHz 0.5%) 10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Audio) ±10 dB, 20 Hz (BASS), ±10 dB, 20 kHz (TREBLE) 168