Onkyo TX-RZ1100 User Manual - Page 49
Surr Back Left
View all Onkyo TX-RZ1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Double Bass Default Value On Setting Details This can be selected only when "Configuration" "Subwoofer" is set to other than "No" and "Front" is set to "Full Band". Boost bass output by feeding bass sounds from the front left and right, and center speakers to the subwoofer. "On": Bass output will be boosted "Off": Bass output will not be boosted • The setting will not automatically be configured even if you performed AccuEQ Room Calibration. ˙ 3� Distance Set the distance from each speaker to the listening position. Setting Item Front Left Center Front Right Height 1 Left Height 1 Right Height 2 Left Default Value 12' 0" / 3.60 m 12' 0" / 3.60 m 12' 0" / 3.60 m 9' 0" / 2.70 m 9' 0" / 2.70 m 9' 0" / 2.70 m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Setting Item Height 2 Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer 1 Subwoofer 2 Default Value 9' 0" / 2.70 m 7' 0" / 2.10 m 7' 0" / 2.10 m 7' 0" / 2.10 m 7' 0" / 2.10 m 12' 0" / 3.60 m 12' 0" / 3.60 m Setting Details Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Default values vary depending on the regions. • Distance units can be switched by pressing MODE on the remote controller. When the unit is set as feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters, you can set between 0.01 m and 9.00 m in increments of 0.01 m. ˙ 4� Level Calibration Setting Item Front Left Center Default Value 0.0 dB 0.0 dB Setting Details Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. 13