Onkyo TX-RZ610 User Manual - Page 51
Enable or disable Auto Standby while HDMI, Ready: Not paired
View all Onkyo TX-RZ610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Pairing Information Device Status Default Value ‐ ‐ ‐ Setting Details You can initialize the pairing information saved on this unit. Pressing ENTER when "Clear" is displayed initializes the pairing information stored in this unit. • This function does not initialize the pairing information on the BLUETOOTH enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the BLUETOOTH enabled device in advance. For information on how to clear the pairing information, refer to the BLUETOOTH enabled device's instruction manual. Displays the name of the BLUETOOTH enabled device connected to the unit. • The name is not displayed when "Status" is "Ready" and "Pairing". Displays the status of the BLUETOOTH enabled device connected to the unit. "Ready": Not paired "Pairing": Paired "Connected": Successfully connected • Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH function is started up. ˙ 4� Power Management Setting Item Sleep Timer Auto Standby Auto Standby in HDMI Standby Through USB Power Out at Standby Default Value Off Off (Off) Off Setting Details Allows the unit to enter standby automatically when the specified time elapses. Select a value from "30 minutes", "60 minutes", and "90 minutes". "Off": Does not turn the unit to standby automatically. This setting places the unit on standby automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" or "Network Standby" is on, this becomes the HYBRID STANDBY mode which reduces the increase in power consumption to a minimum.) "On": The unit will automatically enter standby mode ("AUTO STBY" will light). "Off": The unit will not automatically enter standby mode. • "Auto Standby" is displayed on the display and TV screen 30 seconds before the Auto Standby comes on. • "Auto Standby" does not work when Zone 2 is active. Enable or disable "Auto Standby" while "HDMI Standby Through" is on. "On": The setting will be enabled. "Off": The setting will be disabled. • This setting cannot be set to "On" if "Auto Standby" is set to "Off". Devices connected to the USB port are supplied with electricity even when this unit is in standby mode when this function is "On". • When using this feature, power consumption increases even when the unit is on standby, however, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only essential circuits are operating. 19